Santa is coming, but we know your heart - trade for what you want....as you will be getting coal. :-)

Note new rule 9.5 is you read the rules please remember this thread is intended to swap something you have, or are looking for, to another person for something they have, or are looking for.

It is not a place to clean out your closet.

When folks post a photo with seven or eight items to trade management of the thread gets difficult as things are traded off. With that in mind, please try to limit what you are offering and be very specific about what you are looking for. Thanks. Please follow the rules.

PAY ATTENTION to NUMBER 3. Things have been getting a little lax in this area. Here are the ground rules for the swap.

1) Trades only NO SELLING, I REPEAT – NO SELLING (apparently it needs to be repeated). Sales MUST be placed in the classifieds.

2) After posting, all follow up communication should be via PRIVATE MESSAGE or E-MAIL. This applies to interested parties also.

3) ONE photo, please, for your trade items. If a person shows interest additional photos should be sent via email.

4) Please limit the number of items you are looking to trade. As mentioned above, this is not the place to clean out your closet.

5) Please list the item you are looking for in return. Please be as specific as possible rather than saying "whatcha got?"

6) Please limit your ads to five active posts.

7) If an item is gone please make a post stating xxx from mm/dd (date) is traded. This is for clean up/editing purposes.

8) You can swap non archery items if, and ONLY IF, you are looking for traditional archery items in return.

9) PLEASE REMEMBER TO RESIZE YOUR PHOTOS. The forum guidelines are no longer than 500pixels but if you can resize them to something close 640x480 that will be fine. Photos that are too large will be removed.

9.5) If you know you posted a photo on this thread and you cannot find it, please resize it to no more than 640 on the long side by 480 and repost it. (the original got removed)

Looking for an Asat ( or similar) leafy suit in large or Xl. I have 2117 AO arrows or Goldtip 500 traditional arrows 30” long to trade. Also lots of other items, wool shirts or pants, broadheads ect. Text is best 507-251-7748. Thanks John

Size medium icebreaker boot blankets. Thise are unique as i had fake fur sewn on the bottom as I did not like the noise they made on my stand platform. Open to a lot of trades as I have GWW boot blankets now. Thanks.

Thunder horn 6 arrow side mount quiver includes extra foam insert. Looking to trade for Great Northern strap on.

25,4 " Green -7,4" Yellow barred parabolic feathers. 24 , 125gr glue on field points. 1 dozen 2020 glue in adaptors. Looking for 4" LW chartreuse or Flo. yellow feathers.

Knives, Pearson Dead Heads 4 large 4 small. And vintage cap pistols. I’m looking to make a trade for a Marbles Expert belt knife. If you don’t see anything you like. Tell me what you would trade it for.

I have a 50th anniversary Bear B riser and 48# limbs making a 64" bow. Would like to trade for a Eaglewing, Kemphf, Bigfoot, Dale Dye, Schrew, Javaman, or maybe a Pronghorn. Would consider high forties to low to mid fifties. Thanks

LL Bean back pack. Has a nice rifle but or bow holder attachment on the back also. Looking for a safari tough quiver, reloading components, glock17 mags, something else etc.

I have a Woodchuck disk taper tool to trade I would like 2 dz XX75 2016 full length AO or Camo.

50# med recurve limbs. Not sure the make, I got these with a riser I bought. They feel like they are rated for a 19" riser. Not sure the make, marks on limb say WO1270. Small amount of finish chipped of on upper limb butt. Want to trade for short limbs that will be around 45# on a 19" riser. Open to other trades.

I have a 3 piece JV Outback longbow, osage and maple, it's 62" and 53#@28. I would trade for a recurve 40# to 50#. I can trow in a matching GN strap on quiver for the right trade. Message for pictures. Thanks.

Want to trade my TOELKE WHIP looking for a longbow 40#@28". The whip is 44@28-62" and in great condition. thanks<><

Arrows traded please delete

Vintage Wright and McGill Granget victory model 8040 3 piece bamboo fly rod with spare tip, tube and sock. All original. Looking for a Marbles Expert knife. Or a wood riser Bear take down 40-45#

Black Hunter (left hand) 60x45x28. This is a take down in excellent condition. Looking for 45 ACP ammo. Bows value should be around 100.00 dollars. No critical defense, ball only please.

Got feathers,shooting tabs size L & M left & rt, target pts,ace blunts Looking for pocket quiver, 2016 black or autumn orange or 1916's no less than 29 inch length from throat of nock to tip of shaft.

Looking for black handel buck knives ,ambassadeur round reels that I don't have or phulger president series spinning reels,arrows are 29 in from tip to tip x7 1916,had these a long time,to pretty to shoot

Bow quiver for trade. Was on my black widow. Looking for 340 carbons or …?? lol

Please remove my add from Dec 2 as the bow is no longer available. Thank you

Two sets of ilf limbs. Both shorts. OMP Night Ridge 50# on a 19" riser. SF Premium Carbons, 38# on a 25" riser. Will trade either set for 2013 Aluminum shafts at least 30" or 600 spine carbons at least 29".

Knives for trade. Looking for Marbles Expert

Looking for some antler scraps to make a cane handle for myself, got points, heads and lots of misc archery stuff.

Probably need 1-2" wide 6-8" long to make the handles

thanks

I have a pair of A&H longbow limbs limbs that makes a 66" bow with the 14" riser with the specs 50#@28" and in excellent condition. I am mostly interested in trading for 35# A&H limbs (longs to make a 66" bow). I would also consider a reverse handle 68" ASL in the low 40 to 40# range. I could add an aluminum 14" riser for a complete A&H bow for the right deal - maybe a Northern Mist, St Patrick Lake or others. A takedown ASL reverse handle model is a plus. Thank you for your time.

Looking to trade a bear compound loaded with hard case for a recurve or longbow 58- 62 and 40-45 or so at 28. Value of this set up is around 500.00. Pm or text me for more pics and info. Bear is 50-60 and draw length is adjustable on the cam. Condition is very good.

Have a black handle 119 buck and a USA made schrade sharp finger. Looking for set of nika c1 limbs in 38 or 40#.

Longbow sock - book(tension on the string) - nautica watch(indiglo) timex watch - Bear whitetail 2 riser.

Lookin for a Buck 105 or 605. Louis l’amour leatherette books. Fred bears field notes. Open to options.

Posted this initially towards the last few days of the November swap and trade and still have this available.

Black Bear warf riser with DAS bamboo ILF recurve limbs in extra long. This makes a 66" bow. The limbs are 45# @ 28". I installed the machined plates with JB weld and I'm wondering if I didn't do something right, the bow just sounds awful when I shoot. I have the correct pin adapters and even tried furniture pads to help with the sound. Anyways, I'm done messing around with this, will trade limbs and or riser separately if needed. I've got about$200 vested in this project and am open to offers on anything for trade. If you wanted the whole bow I do have a string I made for it as well, which wouldn't fit any of my other bows I currently have.

PM me if pictures needed I will have to email them. Thanks!

Try making a big change in the brace height. If the bow is straight & nothing loose to rattle you should be able to quieten it. Also Make sure your arrows are not striking the riser. >>>----> Ken

Trade Fedora 560 Hunter 53# or Fedora 560 Hunter 57# for a Bruin recurve 60 # or below. Pictures available. TLM

Have Navajo soft type bow bag and Delta 2 blade broadheads add to my tade offer in above post.

I have a right hand Black Widow by Wilson Bros,H-101 in 52# that I would like to trade for a Wilson Bros in 44-45#.My bow has a maple rizor trimmed in Rosewood with brown glass.No holes drilled or filled and just a few minor scuffs from use.This is a nice hard to find model in Maple.

Regards,Ray

Please DELETE the TOELKE POSTED ON 02-Dec-24.<><

I guess that I need to trade my Black Hunter 45# recurve limbs for some 40# recurve limbs. These are in very nice shape.

I would like to trade this Osage self bow for a set of ILF long or medium limbs that are 30-34#. This bow is right hand, 33#, 68", and was made by Doug Offett in Alabama.

VINTAGE...PSE 8 arrow quiver with aluminum brackets and screws...looking for 1 dozen 400 spine shafts @32" with inserts...I'll try to post quiver pic but I'm having trouble sizing them...thanks...BigJohn

Taking other trade offers on the PSE quiver also...quivers,arrows, feathers...let me know

Resized for BigJohn.

Das dalaa foam carbon limbs 62” 40# limbs new 10 ring string has some wear on front of grip trade for wooden bow 52”-60” 45-55# or for a custom bow for my 13 year old boy needs to be 30-35# for him

Trade this large Horne Hunter main beam, i don't think it's ever been used.

Would like to get a Buck 317 folding knife or other offers.

Resized and reposted tor - the Black Spot:

Like to add this book to the trade items in my above post

Thanks Phil!

Please remove my post from 12/01. I have a deal pending on the Bear takdown.

I have 15 wild edge tree steps and a gen 1 perch platform. American made and veteran owned mobile hunting gear. Looking to swap for other light weight climbing sticks, lone wolf .5/.75 hang ons lone wolf hand climbers(partial trade on my end). Also interested in mid tier binos, archery specific range finders(w/ angle compensation), light weight down bags, good quality kids compound bows in newer condition. Other stuff….hit me up and let me know. I can build custom sets of wood arrows to add as well.

I have a vintage bitzenburger jig that I’d like to trade for a dozen 400 spine carbons preferably Gold Tip at least 31.5 inches or 3 blade broadheads 200 grain screw in or with inserts that could be made to weigh 200 grains.

5 125gr. 11/32 LB Grizzly'. Mounted and shot into foam targets 'cept for one which was a stumpin' head. As new condition. Lookin' for full length LW TruFlite feathers solid/barred lite colored. Mora knife, Victorinox knife, SOG EDC. Could throw in some boot if needed. Thanks, Mike

I have 100 5 in sheild cut rw wild turkey feathers,trade for buck black handel hunting knife or a 110 ,jeff

Limbs from 12/2/24 have been traded. Please remove my post. Thanks.

Eleven (11) Easton 2117's----- looking to trade for dark blue & white 4/5" r/l wing Feathers.

Caribow Slynx 60 inch right hand 47@28. Looking for r/d longbow in 40-45 lb range. Especially looking for a Reynolds MOAB Thunderstick. Will also consider Black Widow longbow or anything else with that style grip and design. Needs to be 60-64 inches long.

Toelke Lynx, 64", 53@28. Trade for same bow or similar 40-45#.

WANTED: ACC components. I have a dozen shafts (620s) which I took in on a trade; almost all need inserts (or outserts or half-serts or whatever they call ’em).

Also can use standard, aluminum inserts for GT Trads, Legacy Carbons, Dark Timbers, etc. if you have those.

The most comparable thing I have to offer would probably be inserts and/or collars for GT Classic XT, but I have a LOT of stuff I’d be willing to trade, so LMK what you’re looking for.

Apologies, the Lynx listed above is 60 not 64".

I am in need for a right hand grip for Bear Mag takedown. 1, 2, or 3R acceptable. I will trade this one piece bow case, have other archery items I can trade. This case is 65" long, 8" wide.

I am looking to trade for a bear 59 Kodiak or a bear mag takedown . I have two bows to trade . thanks jim

Letting the bows I can no longer shoot. Here is a Howatt MAMBA I was told a1992. It's in nice shape has holes for quiver has some scratches but is straight and shoots great and fast. $5@28-58. I have more pics and looking for something lighter around 35 to 40.Recurve or longbow and willing to add coin if needed not a lot hahahaha<><

Mamba is 45@28 ^^^^<><

Lynx has been traded.

Buck nighthawk, trade for Canadian belt knife or other quality knife.

My post of 12/13 wanting a Bear Mag grip can be removed. I found a grip.

Knives of Alaska Cub Bear USA made D2 Tool Steel

Knife is used but in great shape. Great little caper but this is a duplicate for me.

I'll trade on another USA made knife.

Up for trade is a pse nock on embark 70lb package will come with a spot hogg Hunter 5 pin sight, control freak stabilizer pse wad test, tight spot quiver, Tru-fire expert release and a dozen arrows. Looking for a recurve 50-55# 60-64” rh hand text me at +13197689145 can send pictures

Please delete PSE quiver...no longer available...thanks...BigJohn

I have some 340 and 350 spine carbon arrows 31" long in good condition with vanes...looking for a few 2117 or 400 spine arrows...thanks...BigJohn

Resized photo and reposted for sagebrush-

Broadhead and knives sharpening kit,trade for black handle buck knife,i have 119s,would prefer something different

I have two sets of Bear no.1 TD limbs, red/black tips. One is 40#, the other 42#@28. Would trade either for a set of no.3s, 40#@28.

Thank you Phil I couldn't get it any smaller

ISO GRIZZLY 190 glue on broadheads.

Have 160 grain snuffers to trade.

Justin

Another book to add to my trade fodder above

The 340 spine arrows can be deleted...trade made

I need a couple of pairs of plastic arrow dividers, the snap in kind for cardboard arrow boxes. Lots of stuff to trade. James

OMP Carbon-Z Riser with Hoyt gold medalist medium limbs. It makes a 58 inch bow and pulls 48 pounds, looking for metal ilf risers preferably a original Tradtech titan.

Doug hill takedown. (Copy of a Schaffer).rh 60" with 2 sets of limbs 54#@30 and 62#@30,very nice shooting bow.,wanting to trade for a predator classic.

Have Bear Razorheads or Ace Standard 125 grain, would like to trade for Howard Hill Broadheads, mainly the 5/16” size but will accept the 11/32” size or Jerry Hills.

Let me know what you have, will make it worth it to trade!

Trade quivers for left wing bitz clamp.

I have a set of #1 Bear limbs, 51#, pointy brown tips. Gainesville model, and in good shape. Back is camo painted. Have pics for those interested. Trade for Bear collectibles, 1916 arrows or shafts at least 28 1/2 inches, or??

I have a nice Remington 11/87 12 Gauge Full Rifled Cantalever Slug Barrel, Trade for Bear B Riser or Limbs 38-40#, Goldtip 600-700 arrow shafts. Can add cash if needed. What you got. Kurt

Looking for 400 spine carbons at least 31” long. Have things to trade….. text me at +13197689145 merry Christmas

Many longbows to trade in the mid 50s to mid 60s in draw weight looking for target scope redfield 3200,Unertl,Lyman 419-680-2586

Also take nice older Redfield 4x12 or 6x18 scopes on trade for my 11/87 slug barrel above.

Also take nice older Redfield 4x12 or 6x18 scopes on trade for my 11/87 slug barrel above.

Bear limbs listed on 19th have been traded. Thanks

Want swap these goodie for a knife fixed or folder. The blunts are 145gr 17 total. Arizonia EZ fletch is missing the cap but I have been using the plastic ring and works fine. and a Gerber Multi-Lite 07200. Not sure if the light works no battery and do not know what it takes. No toothpick also.Thanks<><

I would be interested in a dewalt 60 volt flex battery for the 1916 arrows listed early in the listing's

Stay sharp fixed blade guide and 5 diamond stone set. Will throw some sandpaper in as well. Has been used, still plenty of life though. Would trade for broadheads. Preferably zwickey deltas, but would entertain others.

I have a Ben Leo bow company skunk pig 46@28 60 inches long . looking for a bear 50th anniversary A riser . thanks jim

The buck and schrade knife i listed back on 12/4, I'd also be interested in full length easton carbon legacy 500 spine. Shafts or fletched

Looking for a nice fleshing knife 2 sided,arrows and such for trade

I'm looking for Thompsoncenter cap loc guns for bows. I prefer 50 cal, but 45, 54, 36, and 32 are okay, too. I have many top-end bows for trade. Drop me a line.

I have a pretty green 25 inch Kinetic Novius ILF riser. Would trade for a dozen fletched 600 Predator arrows.

Looking for some POC 5/16” shafts, 40# spine. Will trade some POC shafts 45-50# spine also in 5/16”. These are quality shafts.. let me know what you have?

Hoyt Gold Medalist from the 90's

I think these are the original ilfs.

I think it's in the high 40's, maybe low 50's draw weight.

Would trade for 2 doz 500 spine carbons, or 3 doz 45-50# quality wood shafts.

Gotta be 30"

Thanks

I have 2 brand new Moultrie Edge series solar panels ($99.99) value each for trade. I need Quality RW feathers 4" Sheild or Parabolic cut, Ace Broadheads or Day One Camo Fleece pullover XL. Open to other trades.

Book on 12-16 is gone

Buck 119 listed on 12-4 has been traded

Looking for a couple draw knives. Have plenty to trade text me at +13197689145

I’m looking for a specific book, it’s called

“The equipment of New France Militia, 1740-1760” By Steve Delisle

I’ve got lots of archery stuff to trade. If you have a copy and want to make a trade send me a PM please.

Thanks

PLEASE DELETE THE HOWATT MAMBA ON 14-Dec-24 IT'S BEEN TRADED.THANKS<><

Items up for trade. Wool shirt is size large and in great shape. Hardly worn. Longbow sock. Nautica watch. Books obviously.

Trade for/toward: Asbell lg pullover with hood. Buck 105 knife. Toxicated by Fred Anderson. Ilf longbow limbs in 55# range. Louis l’amour leatherette books.

Resized and reposted for sagebrush.

"Looking for some of these different sizes to add to my collection, have arrows and such for trade"

Please delete my post from 12/15 the bow has been sold. Thank you merry Christmas

Please delete my ad on Trading Thank you.

I have 6 full length dark timber shafts in 400 spine never shot. I painted a white crest using krylon paint. Will trade for equal number of 500 spine dark timbers. Or????? Email me at [email protected] Thx Matt

Watch and shirt on 12/28 are withdrawn

Nows the time to bust your move on my stuff. I won't be listing it until next year. HAPPY NEW YEARS!<><

If you have already registered, please

sign in now

For new registrations

Click Here