| From: Jimmyjumpup
|
|
|
|
|
|
|
| Date: 03-Sep-24 |
|
Do I need something special to fletch my arrows with a 60/120 configuration with my bitzenberger jig?
|
|
| From: JBM
|
|
|
|
|
|
|
| Date: 03-Sep-24 |
|
Not really sure about the fletching con-fig? Did the literature say anything ODD? I'm sure that one of the LONG TIME BITZ users will chime in! BTW? Just for chuckles, Did You remove that "MAGNET KEEPER" gadget? GOOD HUNTING & BLESSED BE! Batman
|
|
| From: Jimmyjumpup
|
|
|
|
|
|
|
| Date: 03-Sep-24 |
|
I think I got it buddy. No directions for 60/120 but I found the directions by Kelley Peterson from his old website. Thanks
|
|
| From: Corax_latrans
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
What is it you’re trying to accomplish?
120° is what you get with a three fletch. 60° is what you get from a six fletch, which you accomplish just by rotating the shaft 180° and starting over with the three fletch.
But if you found good instructions and wanted to post them here as a Public Service….
|
|
| From: Corax_latrans
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
What is it you’re trying to accomplish?
120° is what you get with a three fletch. 60° is what you get from a six fletch, which you accomplish just by rotating the shaft 180° and starting over with the three fletch.
But if you found good instructions and wanted to post them here as a Public Service….
|
|
| From: Steve P
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
Are you referring to a 4 fletch (60/120) configuration?
Steve
|
|
| From: aromakr
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
The four fletch configuration on a Bitzenburger is 75/105 or 90/90. I've never heard of a 60/120,
Bob
|
|
| From: 2 bears
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
Have you got the clamp for the proper wing? 60 would be 6 fletches accomplished like Corex Latrans stated above. 120 is standard 3 fletch >>-----> Ken
|
|
| From: Bob Rowlands
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
When I do 6-60, I install three at 3-120. Then pull the arrow, rotate the nock 180 degrees, reinsert the nock and install the other three. Result = 6-60.
So, I'm thinking for four at 60-120, do the above, but eliminate 2 so you have the opposing symmetry of four @ 60-120.
|
|
| From: Jimmyjumpup
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
There is a 60/120. Bob has it.
|
|
| From: Cody@Bitzenburger
|
|
|
|
|
|
|
| Date: 04-Sep-24 |
|
We offer a 60/120 Nock Receiver, just give us a call. You can pull out your current nock and replace it with the 60/120. The 60/120 will work with any clamp
|
|
If you have already registered, please sign in now
For new registrations Click Here
|
|
|
|
