As you read the rules please remember this thread is intended to swap something you have, or are looking for, to another person for something they have, or are looking for. It is not a place to clean out your closet. When folks post a photo with seven or eight items to trade management of the thread gets difficult as things are traded off. With that in mind, please try to limit what you are offering and be very specific about what you are looking for. Thanks. Please follow the rules. PAY ATTENTION to NUMBER 3. Things have been getting a little lax in this area. Here are the ground rules for the swap.

1) Trades only NO SELLING, I REPEAT – NO SELLING (apparently it needs to be repeated). Sales MUST be placed in the classifieds.

2) After posting, all follow up communication should be via PRIVATE MESSAGE or E-MAIL. This applies to interested parties also.

3) ONE photo, please, for your trade items. If a person shows interest additional photos should be sent via email.

4) Please limit the number of items you are looking to trade. As mentioned above, this is not the place to clean out your closet.

5) Please list the item you are looking for in return. Please be as specific as possible rather than saying "whatcha got?"

6) Please limit your ads to five active posts.

7) If an item is gone please make a post stating xxx from mm/dd (date) is traded. This is for clean up/editing purposes.

8) You can swap non archery items if, and ONLY IF, you are looking for traditional archery items in return.

9) Please remember to resize your photos. The forum guidelines are no longer than 500pixels but if you can resize them to something close 640x480 that will be fine. Photos that are too large will be removed.

If you have multiple items in a single pic/post don’t post a single item is gone. Yes, we know it causes you more “sorry it’s gone” replies, but, since you have a multiple item post it can’t be removed without removing all of your items, so your note just adds to the thread length.

Thanks for your understanding.

Thunderhorn quiver brand new. Will trade for 600 spine arrow shafts, feathers or jojan right wing helical clamps. Other items considered.

Gerber Knife and sheath. Trade for Snuffer 160/190 glue-on heads, Grizzly Instinct 175/200 glue-on, VPA 250 glue-on; also have VPA 190 glue-on to trade.

Looking for a RH black and white calf’s hair side plate or the complete set. I have lots of small things to trade. Nocks, 4” feathers, field points, several recurve sights etc

Looking for a RH black and white calf’s hair side plate or the complete set. I have lots of small things to trade. Nocks, 4” feathers, field points, several recurve sights etc

I'm wanting a decent Schrade Bowie Hunter knife, or H15. One I'm after - the basic look of pictured here....stacked leather and red spacers. MIGHT be a 138-L or an H-15. I will take either one. IF like pic. I have a dozen OD green Gamegetters 2018s inserts in & nocks, needing cleaned & fletched. 30.125". to trade. + or -.

Got copperhead skins and timber rattler ta trade'' lookin gfor tre saddle's, climbing sticks, saddle platform, life line, lineans rope, and tree climbing rope steps''any thing else tree saddle related,, also interested in repelling gear'''''

LH 59 Kodiak [email protected]”

Trade for a Bear takedown.

Vintage limb covers , tree bark and woodland Camo both sets

new in package.

Trade on other gear.

Looking for RW 4" SHIELD CUT FEATHERS. flo yellow and white. I have many 5" parabolic and shield cut feathers to trade. Thank you!

I still have 3 sets of ILF limbs and no riser. I would like to trade these limbs for a set of Bear TD limbs or a Bear TD riser. I might also be interested in a 45(ish)# longbow...or ? I'm not an ILF guy but this should be enough information. WNS Explorer B1 Bamboo 68"/38#(25" riser), Samick BM2.0 66"/42#(25" riser), and Hoyt GM 68"/42#(25" riser). All limbs are near new and the hoyt limbs have a cool carbon fiber dip.

Have 17 Beman Centershot 340s cut to 30" bop with factory inserts hot melted in. In search of some wood or aluminum arrows

This is an adjustable Frankenbow made from a Hoyt Magnatec. The pockets adjust and full in, these Ragim limbs pulled 42# (rated 40# 68") but backed off 4 turns, they pulled 39# and that was about halfway. I added another hole for the strike bolt forward, as it is designed with a built in overdraw and the standard holes were way too far back. It has a short 6.5' brace height. Don't know what the string is, as I didn't build it...just one I had on the hook. The limbs developed hairline cracks from the bolt hole to the locator pin and to the end. I dabbed crazy glue on them and made a mess but it seems to be holding. The paint is gone off the shelf as it had a homemade rest on there when I found it. The grip is great and it balances well. Shoots good too.

I could used 45-50# Sage limbs, 76er limbs, or partial trade towards ILF limbs could be discussed. Thanks

Mahantango Red Tail Classic string follow ASL built August 2021. 66", [email protected], straight grip. Elm limb cores, Osage riser, brown glass on back and belly. Trade for another ASL with similar specs.

Trade this 45 pound Holm Shrike 66 inch like new longbow for compound. 850-524- 8197

Trade this pair of Steger Mukluks and Rifle sling for decent pocket knife and or 125g screw-in Broadheads

Boots size says 11 , but I have a 11 shoe size and fits very tight. I would say the boots are a size 9.

Want to trade 3 straight JoJan clamps for 1 LW clamp and 2 RW clamps. I also have an another straight clamp that I would trade for some 4" RW feathers.

Looking for a couple single Jo Jans with straight clamps.

Have bitzenburgers or feathers or other things to trade.

For trade lefthanded Big Foot Flatliner longbow, 64", 40#@28". Looking for a lefthanded T/D longbow in the 40# range.

I have heavy weight screw-in field points for you high FOC guys. I have 300 , 250 and 225 gr. tapered field points I'm looking for an old Check-It vertical sight pin with integral level like the one pictured. I think they were 8-32NC thread, but I just need a pin, not the whole micro adjustable system they went with.

Looking for 1816 shafts/arrows at least 28" using standard measure with swaged nock end, day pack with waist belt and MOLLE attachmentent points about 2500-3000ci, or USA made full tang fixed blade 5-7" long for my get out bag.

Schrade fixed blade is in very good condition. Pocket knife is small stockman style and EFA quiver is in very good shape with Talon attach. Have other things to add depending on what you got.

2019 Striker Classic 62 AMO 50#@28. One piece R/D longbow. Looking to trade for Bear Super Kodiak 50 to 70 #

Please delete my 59 Kodiak listing.

i have a tree saddle with the platform to stand on.would like to trade for a left hand bow 45# 59 kodiak 1st choice or other archery stuff

I have a nice refinished kodiak hunter [email protected] Interested in trading towards other stuff either longbows in the 40-45 range or towards a bear mag riser. Can add cash for right deal. Not specifically looking for anything certain just wanting another bow to play around with

I have a nice refinished kodiak hunter [email protected] Interested in trading towards other stuff either longbows in the 40-45 range or towards a bear mag riser. Can add cash for right deal. Not specifically looking for anything certain just wanting another bow to play around with

Please delete my post of 1 August 2022. Thank you!

Please delete my 8-2 post thanks

I have 12 full length Gold Tip Traditional 500 arrows with neon yellow wraps, would like to trade for same arrow in 340.

I have 340 gold tips 1/2 doz 32inch.I have 2 blade zwickey broadheads all 240 grain with inserts.2 are 2blade & 1 is a 4 blade. In need of 225 gr target points 5/16 steel screw in,500 gold tip at least 29.5 inches or some limb covers. I also have 2 blade deltas 160ish gr

I have a bunch of Spanish cedar shafts in ranges from 25-40 spines. spines (20-25) and (25-30) come with a 11/32" shaft

* All spines (30-35), (35-40), and (40-45) come with a 23/64" shaft. I’d like to trade for stiffer spine wood shafts or 2016 Al—I will trade 2 dozen of these for 1 dozen of yours. Also interested in glue on Centaur, Simmons, or VPA broadheads, or? PM if interested and I can give more info and we can work something out. Thanks, mg

Please delete my post from 8/4/22. They have been traded.

Here is a Pearson Hunter 7090 58" [email protected] 28 I am looking for 2 doz 2016 arrows or shafts, not beat up just clean. More pictures available

I have the following new or lightly used recurve bowstrings all made by makers on the LW, I just no longer need these sizes: -one Steve Baker Mountain Muffler 58" ASL, installed to stretch in for a ouple days and removed as a spare. -one Pierre Lucas 61"ASL, 8-strand skinny for < 50# bows, lightly used -Two brand new (one 60"ASL, one 60-1/2ASL") never used that I won in a giveaway on the LW, forget the string maker.

Will trade any one string for a Check-It pin with level, pictured in my previous post.

Beiter insert nocks, looking for glue on field points around 185gr.

Centershots from Aug 1 are traded.

Quiver is traded from Aug 1. Please remove.

2020 Wes Wallace Mentor 50#@27" looking to trade for a longbow 48-53# 64" or longer

Trade this 2xxl/3xxl Kings Camo Desert Heavy Duty Coat. NEW condition, STORED FRAGRANCE FREE/WASHED FRAGRANCE FREE/SHIPPED FRAGRANCE FREE. Blends tremendously in any cover and treestand. Only trading fue to receiving a new jacketas a gift. Looking for 40 lb longbow limbs to fit a sage wood riser.

Please delete my Aug.2 ad bow for trade, it's gone.

You can remove my double post from 8-1

3 pair ready to use ILF wedges to make your own.Grey actionwood.Open to most of trades ammo/knife/packs whatcha got.

Bear Archery Black Bear (LEFT HAND) white maple [email protected] 60 excellent condition. Bear Tigercat [email protected] 62" Left hand very good condition will trade for Fly fishing gear, Cool Bear collectables. A set of #1 35-45 pound Bear takedown limbs. A really good one man tent.

Palouse Millennium static tipped recurve rh 60” [email protected] fantastic condition for trade. Looking for a schulz, northern mist, two tracks, hill style longbow rh 68” [email protected]

WTT the following:

11- Gold Tip Trad 400 blems with ArraFooters.

5x are 28-15/15” Nock throat to BOP with GT aluminum inserts.

4x are 31” with GT 100 grain brass inserts.

1x is 31” with GT aluminum insert.

1x is 31-3/16” with 100 grain 3Rivers brass insert.

10- Beman Centershot 340 some fletched with trad vanes.

6x are 31-15/16” with standard inserts

4x are 32-1/16” with standard inserts

Looking to trade for wood arrow making tools, finished wood shafts 29” or longer and in the 50-65# range. Let’s trade!

Have a 1974 Browning Wasp near mint, 50# will trade for a short (15-17”) right hand ilf riser. Just ask for more pics.

Please delete post from August 5

Trad Tech Titan3. Comes with 3 Grips and internal riser weights ( installed). Would trade for a 21” Satori or may be open to other trades as well.

Lol. I don’t have a clue where that picture came from!

Here is a Bear C Mag riser which has been re-finished. Good condition. Limbs are #3s and have been painted black, fair condition, 70"-28#, 64"-31#, 60"-33#. 3W6900. Looking for Hoyt Excel riser and light weight ILF limbs.

That is a picture of Roy Day of agincourt archery in bc. One of the nicest and most knowledgeable archers and bowyer I have ever known

Thanks for the info anonymous

As above, that's my pic of Roy.

Good man.

From L-R, Das/sky 50# longs, SF elite 36# longs, uukha gobi 30# longs. Interested in a 21" das riser. Preferably in ilf, but das fine also.

Please delete my Aug 8 post for the Bear C Mag

Microtech socom alpha tanto edge and socom alpha mini tanto edge. Both new in boxes with kydex sheaths.

Looking for Rh great northern ghost or a rh static recurve.

Matt

Looking for some 200 grain screw in broadheads....VPA 3 blade or 2 blade. I have 150 grain VPA 2 and 3 blades to trade. Message me a cell number and I will text pictures. Thanks

Pls delete my post on 09aug22, thanks.

I have a 2010 bear Byron Ferguson Patriot 64 [email protected] . Looking for a bear 59 repro .thanks Jim

I have a Black Hunter Viper 60” 40# right hand that I would like to trade for a right hand back quiver

Woodsman Elites, 125gr. Basically new, Never been mounted on arrows. Looking to trade for Magnus Stingers 2 blade 125 or 150 gr.

Cartland 140d magnum fly reel new old stock,will trade for kids bow.can send pictures!

Please delete my Aug 11the post for the knives. Thanks! Matt

600 or 700 arrows, shafts, or most anything archery.

600, 700, arrows, shafts, or most any thing to do with archery.

Don't know why they are sideways they are upright in my file. Incase you can't tell that is like a knapped arrowhead overlay around the bottom back quiver. >>>----> Ken

Please delete my ad from the 11th. Bow has been traded.

Please delete August 1st, Holm bow trade, thanks

Please delete my add on the 7th of the wes wallace. Thanks

Please delete Aug. 12,first quiver with turquois beads. It has been traded. Thanks >>>----> Ken

Black Widow Split Finger Tab Size Medium

Very Lightly Used - Maybe a dozen or so shots

I would trade for some type of 3 under tab that's in good shape

One dozen GT blem 600 cut to 29” with outserts.

8 GT blem 600 cut tut to 29” with outserts hot melted in and 5 fletched.

Looking for 500 spine or 45/50 POC tapered or comparable archery stuff..

Please delete my add from the 12th !

Tradtech Black Max 2.0 medium limbs, 35#. ILF fittings. Looking for any 190 grain Simmons broadheads, Easton axis 400 spine arrows, or??? Shoot me a note and let me know what you have. Thanks!!

Will trade an Arizona ez fletcher with right and left arms for a riser mounted bow quiver... thanks... BigJohn

LH great northern limb bolt quiver. Want to trade for Selway slide on quiver , open to other offers.

Also have a case knife ( brand new) and a Landsky sharpener. Need some 500 or 600 spine EASTON Axis shafts/arrows at least 29" in length. Also open for other trad trades.

The post of August 13th for the ez fletcher can be deleted...trade made... BigJohn

Used 2016 shafts 27.5" - 4 XX75 Camo Hunters, 3 GamegetterI (green with more durable finish then originals) - all with swaged nock ends. Clean inserts installed. Some have scratches to finish removing old vanes. All checked/tweaked on straightener.

Looking for a book on traditional archery, bowhunting, outdoor adventure, nature, etc. PM a title or two if interested in these.

Am also looking for a new Norway/Q2i defletching tool that I would trade the Kings Camo coat for.....

Have 250 vpa 3 blade brand 1 1/4” new in package

Want to trade for 3 blade 250grain cutthroats

Thanks

Josh

Woodsman Elites from August 12 have been traded. Thunderhorn quiver from Aug 1 has been traded. Please delete, thank you

LH - B 50th Bubinga/phenolic ( maple riser not for trade )

Will trade for a LH B green stripe.

Would trade the Trad Tech Titan 3 riser listed above for a 25” riser of equal value

4 left bevel Grizzly 125gr (average 129gr on my scale). 1 has been used for practice and shot into target, the others have been mounted and honed a paper wheel but not shot. Looking to trade for glue on Zwickey 4 blade or Wensel Woodsman broadheads. Thanks, mg

Please delete my post with with the Palouse recurve

Please, delete my 1 August post, knife is headed to MN.

Thunderhead 160. These are big old heads. I have 11 full ferrels. 1 that is missing the metal ring that holds the blades. 120 new blades...3 used blades.

Trade for 125 or 175 screw in heads or 4" rw shield cut feathers. Thanks

Please delete my posts of August 1 & 4. Painted and keeping. Thanks

I have 12 NOS 2117 XX75 Mossy Oak arrows fletched with green/gray barred feathers 30.25" cut end to throat of nock. Would like a RH wood ILF riser. Thanks

Got some stuff to trade. Woodies in box have Bodkin heads. The aluminum arrows are 1916 lites and one 2117. The bow is a Bear silver mag. Riser takes 76er limbs if you want to change over would like to try a black hunter 40 to 45lbs. Call or text for more info on stuff. 989 780 1458 thanks, Randy.

Bob Lee Signature, complete package, 2 sets of limbs 47#@ 28 and 52#@28 , 60”, quiver, bag, 2 additional strings, gaskets, booklets, etc. Will trade for a nice Zipper in the 50# and up range.

One dozen carbon express arrows. Would like to trade for wood arrows, shafts, arrows building supplies.

I have so many custom made wood arrows from folks like Snag, Suzzane St Charles, Fletcher etc. Most have some sort of barred turkey feathers as a cock feather. All are 27.5" (except one dozen is 27 3/4). Spines range from 60-65 to about 80-85.

I truly love wood arrows; they represent all things good with traditional archery. The problem is that I just have a confidence problem shooting them.

If any of you shorter draw folks have anything worthwhile to trade (2018 shafts would be nice for starters) let me know. I plan to be an easy trade. I can send pictures when you need them. Too many to post here.

Bear super kodiak and a black widow T1200 for trade. Looking for a good quality self bow around [email protected]”

The widow tab I posted on the 13th can be removed. It has been traded

I think I want to try a bamboo longhunter in the 50# range. I have a lot of stuff to trade- if there’s any interest we can narrow that down.

I have a LH custom longbow roughed in. Not sure of poundage, but at least 60# by the thickness of the limbs. Or a ‘65, 47# LH Grizzly. It has 2 holes someone has filled. Will trade either for a Zebrawood Super Necedah in the 45# range

I’m interested in trading for a side mount quiver…preferably a great northern, but open to others. I have arrows, feathers, brass broadhead adapters, takedown bow case, youth shooting accessories, and other items to trade depending on what you’re looking for. Thanks, Dave

If you have already registered, please

sign in now

For new registrations

Click Here