I’m sorry for deleting the original Swap and Trade thread. My iPad slipped and my thumb touched the wrong button. Seems far-fetched big that’s the truth. No conspiracy and nobody said anything out of line.

Please repost your items.

As you read the rules please remember this thread is intended to swap something you have, or are looking for, to another person for something they have, or are looking for. It is not a place to clean out your closet. When folks post a photo with seven or eight items to trade management of the thread gets difficult as things are traded off. With that in mind, please try to limit what you are offering and be very specific about what you are looking for. Thanks. Please follow the rules. PAY ATTENTION to NUMBER 3. Things have been getting a little lax in this area. Here are the ground rules for the swap. 1) Trades only NO SELLING, I REPEAT – NO SELLING (apparently it needs to be repeated). Sales MUST be placed in the classifieds.

2) After posting, all follow up communication should be via PRIVATE MESSAGE or E-MAIL. This applies to interested parties also.

3) ONE photo, please, for your trade items. If a person shows interest additional photos should be sent via email.

4) Please limit the number of items you are looking to trade. As mentioned above, this is not the place to clean out your closet.

5) Please list the item you are looking for in return. Please be as specific as possible rather than saying "whatcha got?"

6) Please limit your ads to five active posts.

7) If an item is gone please make a post stating xxx from mm/dd (date) is traded. This is for clean up/editing purposes.

8) You can swap non archery items if, and ONLY IF, you are looking for traditional archery it ems in return.

9) Please remember to resize your photos. The forum guidelines are no longer than 500pixels but if you can resize them to something close 640x480 that will be fine. Photos that are too large will be removed.

If you have multiple items in a single pic/post don’t post a single item is gone. Yes, we know it causes you more “sorry it’s gone” replies, but, since you have a multiple item post it can’t be removed without removing all of your items, so your note just adds to the thread length.

Thanks for your understanding.

Too funny! Happens to the best of us! It's OK Phil!

I'd like to find another Hoyt Tracker 19" metal recurve riser, preferably with original limb pads or plates added on over, so I can remove plates & convert it to DAS. Complete bow ok too. I have arrows & knives & feathers & warf risers to trade. See picture of Tracker risers.

Feather Flex hen decoy. Will trade for an inexpensive backpack/knapsack. Nothing elaborate like a camping backpack with frame. A simple student bookbag/work backpack is what I need, as long as it's adult sized. I still have the other items in the pic if you see something you need.

I have 3 packs (9 total) of NEW 150 grain Magnus Stinger 2 blade heads, still in packages, never used. I would like to trade for 9 new condition Magnus Stinger 125 grain 2 blades. These were approx $39 per pack. Also possibly trade for a nice fixed blade knife?

I have 2 older Bear recurves to swap for Hill style longbow or D shape straight or slightly dished handle. 45@28 or close and 66-68" RH. One is BEAR GRIZZLY 50@28-58 and the other is a Kodiak Magnum has black overlay and tips(weird) 45@28-52" The bows are in really nice shape and shoot great, the mag does have 2 small holes in the riser for a quiver. Thanks<><

I have a 64" Old Mountain Mesa marked 45#28" (my scale says 48#@28") This bow shoots a very quick arrow. I am looking for a lower weight longbow.

I make custom pot style turkey calls. Looking to trade a cherry call, your choice playing surface for full length gold tip hunter 400s.

Looking for VPA 175 grain; Grizzly Instinct 175 or 200; Snuffer 160 grain heads.

And/or these.

And/or these sheaths.

This Martin MTD if the deal is right.

Good on you Phil.

Three VPA 3 blade broadheads, the are over 300 grains . My digital scale died so I don't know the actual weight. They're also wider than most VPA broadheads. I think they might have been prototypes of the heads made for Big Jim . I can text pictures. Looking to trade for a titanium water bottle at least 750ml would prefer 1 L. Open to other trades.

Looking for 1/2 Dozen VPA or Woodsman screw in broadheads 125gr. Will consider other 3 blade screw in heads at 125 gr. I am willing to trade a signed Billets to Bow book for them. Would also consider carbon shafts "600's". John

Have several box style turkey calls, black walnut/black cherry. Trade for full length wood arrow shafts, or maybe something else?

I am willing to trade 2 tabs for one dozen full length 600 spine carbon standard size shafts.

Looking to trade off my English Longbow. Roughly 55@28 and 75” NTN 81.5 OAL. It’s made of Elm and shoots nice but it’s just too long for me to mess around with in the brush of Northern Minnesota.... So it hangs in my shop! I did not build this. I traded a fella for it a few years ago. I’m be looking for another shorter selfbow or a modern made longbow 64-68” and 45-50 pounds @28”. More pics upon request.

Forgot the damn picture.......

I have #55 recurve limbs for a Samick Sage. I would like to trade for longbow limbs in #50 or #55 that will fit the Sage riser.

'67 grizzly. 50#. Good used condition, some white paint splatter marks from probably painting a ceiling in the room it was stored. A couple scratches(it is over 50 years old). Endless loopnstringncould be replaced, but works. Shoots great. Looking for a browning backpacker, orginal mesh trophyline treesaddleM or large), good wool, try me. Thanks for looking, can send more pics upon request.

John, this what you’re looking for to trade?

Addendum: I would make 4 tabs for the 600 spine arrows. Looking for full length shafts.

Trade for something else to stiff for my bows.i need 35lb cedar or 600 Entrada or 700 dark timber

2117, 2213 and 2312 that are 27+"to 28". Shafts have inserts, tips and nocks. Just need fletching. About 2 dozen of each. Bite off what you want for a trade. Trade for Buck 110, Camilus 714, custom/home built knives, ammo 9mm, 223, 303. Cheap spotting scope. Maybe cheap range finder. OTHER stuff you do not use anymore. :))

Misc Mfr carbon arrows with inserts, tips and nocks. Lenghs 27+, 28+, 29+ and 30+". About a dozen or so each length. Bite off what you want for a trade for your project. Trade for Buck 110, Camilus 714, custom/home built knives, ammo 9mm, 223, 303. Cheap spotting scope. Maybe cheap range finder. OTHER outdoor stuff you do not use anymore. :))

13 qty 2016's 26+" with inserts, tips and nocks/provided. Trade for Buck 110, Camilus 714, custom/home built knives, ammo 9mm, 223, 303. Cheap spotting scope. Maybe cheap range finder. OTHER stuff you do not use anymore. :))

2314xx75 and sure wood shafts 75//80 hunters

Would like to trade for weaker spine arrows 30” long or longer.

Trade for 700s dark timber un cut

21" ilf riser, trade for a 19".

To short and to stiff for my bows.trade for 30 35 spine

Hickory arrow shafts. Super tough and nearly unbreakable!! 2 dozen unfinished 5/16” Hickory Shafts from Mike Yancey at Pine Hollow Longbows. Nock and point tapered, spine is 45/50. 19 are cut to 29”, 6 are 28”. Like to trade for a good Osage stave

Hickory arrow shafts. Super tough and nearly unbreakable!! 2 dozen unfinished 5/16” Hickory Shafts from Mike Yancey at Pine Hollow Longbows. Nock and point tapered, spine is 45/50. 19 are cut to 29”, 6 are 28”. Like to trade for a good Osage stave

6 Deadheads swap for some limbs to fit my InterNature riser prefer 45 to 55 pounds may also be interested in a laser rangefinder. Thanks

Have a box of 44mag ammo looking to trade for fletching jig or?

Three quivers. Looking for a vintage American belt knife.

Two talk a bouts radios. Looking for a Gerber folding saw and a fire steel. Or ferrous rod.

I am looking for some older ALUMINUM shafts. Especially patterns that are not made anymore. I need 2018, 2016, 2114. They need to be at least 30”. I don’t care if they need work, like beat up fletching or whatever. They just need to be straight.

To trade, I have a ton of stuff. Turkey feathers, broadheads, Alice packs, wool shirts, leafy suits- bunch of stuff.

Looking for: Martin brass quiver/ sight brass bushings. The ones with the shoulder around the bushing like pictured. I have strings, broadheads, ect ect to trade. Pictures to 507-251-7748. Thanks John

Martin Bandito 51# 58” very good condition. Thethrd Phantom Saddle like new.

Will trade for an HHA single pin slider, full length 2216 shafts, 150 grain magnus stingers, a high quality archery range finder a Benjamin marauder or other quality air rifle, a diamond atomic youth bow R handed, a Cz 455/452, or a 21 inch riser Das or ILF. May also consider Benchmade knives, lightly used first lite gear,

I have no idea where that picture came from. These are the bushings I’m looking for. Thanks again John our

Hey Dan, Pm me, Clay

I have an untouched rambo riser. I was looking to trade it for a clone hoyt buffalo ilf riser or a junxing ilf riser. I can send more pictures if you're interested.

FirstLite pants 32x32 NWT. Trade for: quality outdoor wool pants, perhaps cargo preferred non-camo 175 grain 3 blade VPA 1 1/4" (them wide ones!) some heavy like 12gpi 300 spine shafts

Trade for weak spine arrows in any materials

I apologize, I didn’t realize the paper was unreadable until I post pic of arrows above

All are surewood Douglas fir hunters ,Except Fletched shaft are tapered shafts

Spines are 70/75 and 75/80

I’d like to trade for weak shafts in 55/65 - 60/65 or 600/500 spine carbons,aluminum.

American leather crossover rh LG. Looking to trade for a american leather full shot glove or maybe some cedar arrows or shafts 45 to 50 or 50 to 55 spine.

Traditional Bowhunter Mags.

From 1991 to 2009 in different stages of condition. +- 30 issues.

Message me for complete list, Looking for wood shafts in the 40-45 # range 1916 aluminum.

Tourbon leather small hatchet sheath and holster

I have a LW clamp for a Bitzenberger that I would like to trade for a straight clamp. Thanks, Dave

Trade for 700 dark timbers or 600 entrada.uncut.size 38 loops for 44 or 45

Have collection of Bowhunter Magazines 80's, 90's and early 2000's. If interested PM me and I'll get specifics.

Looking to trade my Bear Stryke 30” ATA, 40-70 pound draw, 26-30” draw length and 80% let off. I’m looking for a Longbow 45-50 pounds@28”.

I have an ultrasound parts cleaner, some hand tools, and gunsmithing books. I have about 60-70 hour long gunsmith videos on thumb drives. What to trade for a nice rt hand 45-50 pound recurve, good fletching jig, quivers. I can send pictures of what I have.

I have a bunch of bow quivers,

A fuse quiver 6 arrow with quick release mount random 8 arrow bolt on quiver, no foam crack in the hood Plastic BEar quiver 7 arrow, no foam quick release mount Kwikee Quiver 6 arrow, rubber insert with quick release mount

Nice 8 arrow quiver essentially new foam It is the top quiver. I made it into a Asbell style with some canvas strap.

Trade for arrows(600+ spine), broadheads, knives, or other things.

I have some random archery stuff here A optical range finder, no batteries needed, A compound release Compound rest A Cobra Bright Eye sight NIP Hoyt/Easton 5 pin sight A quiver mount, looks similar to the one on the Kwikee

Trade for arrows, broadheads, knives ....

Lastly a bunch of stabs and stab weights

2 rods of compounds 2 10" homemade stabs 2 1"x 12" carbon rods to make stabs 1 Doinker 6" 1 8" aluminum stab 1 Cobra quick release for stabs bunch of assorted weights and dampeners

trade for arrows, broadheads, knives...

Last one

Flemish String Jig 2 HK-91 mags Bow scale Yellow glue on nocks Garmin GPS 60CSx Camo TP Martin Limb tape NIP Limbsavers new in package ILF insert for wood riser American Leathers glove, missing the slick leather on one finger nock pliers antler burr pendant sign Robert Kempf

trade for knives, arrows, brodheads, risers... Turkey Box call birds eye maple I believe Bow marking tool for tillering selfbows

Should mention, I am willing to mix and match the items in my posts

looking to trade a thunderhorn quiver for a bitzenberger with clamp or ( clamps), cant get pictures to load can send pics via text 701-390-0560 thanks Kevin, PS this is a front mount quiver

I’m looking for 150 grain magnus stinger 2 blades. I have a barn full of stuff I could trade, give me an idea what you are looking for and I’ll dig around for you.

Razorbak 5 - (4)142 grain broads, (2)practice points, tightener all in case. Looking to trade for Magnus Stingers or Killer Bees, prefer 150 grain but will consider others. Open to other trade offers also.

Montec 125 grain - 3 new and 3 used. Looking to trade for Magnus Stingers or Killer Bees, prefer 150 grain but will consider others. Open to other trade offers also.

Ben Pearson old hickory longbow 30 lb. trade for sage 40- 45lb. limbs.

Easton 2219 arrows and shafts for trade: All measured to back of nock.

XX75 Gamegetter II Fall Camo33.5” (6) 29.25” (2)

XX75 Camo, 28.75” (3) 30” (1)

XX75 Orange, 28.75” (5) 29.25” (1) 31.5” (1)

Gamegetter1 OD, 29.25” (1) 30.25” (1)

Fall Stalker Fall Camo, 31.5” (1) Trade for nice skinning knife or?

Sorry, these must all go together, not breaking them up. Trade for nice skinning knife or ?

Or 1916 shafts with inserts

I'll swap someone an Arizona ex fletcher for a grain scale...any takers??? ?? thanks BigJohn

If you have already registered, please

sign in now

For new registrations

Click Here