Are there smaller nocks for youth arrows, or do you have to build up the serving on the string? using 1535s....and a bear cub. 30#

Thanks guys,

Prayers for you guys!

Use the correct serving size to fit the nock ...

Michael

1/4" and 17/64 and 9/32 are available

Small nocks have been avaiable for over half a century. Just get the right size for the shaft you are using, then fit the nock to the string serving. Without knowing how you have them set up it's difficult to point you in the right direction. Can's use 1/4" nocks on 5/16 arrows very well, and 5/16 nocks will swallow- up a 1/4" shaft like the 16/64.

Small nocks have been avaiable for over half a century. Just get the right size for the shaft you are using, then fit the nock to the string serving. Without knowing how you have them set up it's difficult to point you in the right direction. Can's use 1/4" nocks on 5/16 arrows very well, and 5/16 nocks will swallow- up a 1/4" shaft like the 16/64.

Ditch the gt nocks and get easton super nocks or s nocks, same thing but have smaller throat than gt nocks.

Or you can get bushings for the shafts that allow use of f nocks or pin nocks. Both of which have the option for large or small throat nocks thru LAS.

I get nocks for 1/4 shafts from Kustom King.

Caney -

0.098" nocks = 14 strands of D97 or 12 strands of Dacron with 0.020 serving.

0.088" nocks = 16 strands of D97 or 14 strands of Dacron with 0.020 serving.

You rig takes 0.098" nocks if you're using the right string.

Viper out.

If you have already registered, please

sign in now

For new registrations

Click Here