Anyone know where or if I can get 200 gr. Points in 9/32" diameter? I have some GT Traditional Classic arrows that are 9/32" diameter and need heavy points.

Thanks in advance!

Rick

Might want to look for brass inserts - but I'm not sure if they make them that size.

I have never seen anything bigger than 125.

Try Alaska Bowhunting Supply. Theirs are tapered to 9/32 on the back end.

I found them in 175 on the big auction site-- i think they had 200 also.

Many heavier points heel taper to that diameter. I have a lifetime supply. I think some are PDP.

DDave

Thanks gents! I will try Alaska Bowhunting supply. I have tried ebay and every other archery store I can and no luck.

Also I thought about adding the brass weights for these arrows, but they only come in 20gr.'s and I dont want to add 4 to each arrow.

Good shooting!

Not exactly what you're looking for but close:

Three Rivers

F221X 100g 5/16" diameter steel glue-on field point AND 4930X 100g 5/16" or 9/32" diameter Brass Broadhead Adapters

Are you talking about filed points or broadheads?

If you are talking broadheads, you are better off using either 5/16" or 11/32" heads. The increased size of the ferrule in relation to the size of the shaft (bradhead ferrule is larger than the shaft) will aid in penetration.

I once bought 9/32 175 gr from 3rivers. Worth a check.

Sorry guys I think some got it. I am looking for field points. I bought Tusker 200gr broadheads, but can't find smaller diameter field points.

It was pretty obvious you were looking for 9/32 field points, not “filed” points! I, too, have been looking for heavy 9/32 points so am following along...

Some people are just too eager to share their knowledge and opinions!

I had some Easton Axis Traditionals (which I believe are 9/32) and I tipped them with 200, 250 and even 300 grain field points. Just ordered the standard screw in field points from 3Rivers. They fit all arrow inserts that have the standard 8-32 threads. Only arrows that they won't work for are the Deep six arrows.

One thing I'll add is that I had footed my Axis Traditionals with the carbon collars and that made the transition to the point smoother and it made those arrows just bomb proof. I shot one over my target once and straight into a rock in my Wife's garden. Field point bent about 5 degrees but the arrow was fine. Just incredible.

Appreciate ya' Backcountry.

Bless your heart, Frank.

Ahhh heck Ken, Thank You.

Start with PDP website. Call them to see about buying them.

I have never weighed one of their points that was a grain different from nominal.

I bought all mine from suppliers here in Canada who cater to trad shooters.

DDave

Heaviest I could find was 145gn. I footed my Easton Axis, and now use 5/16 field tips. You could get some of the GT ballistic collars, and then use larger field tips.

175 gr. https://www.kustomkingarchery.com/Converta-Field-Points-SCREW-IN/productinfo/4402/1585|1591/

175gr. https://www.3riversarchery.com/steel-screw-in-field-points.html

250gr. tapered back https://www.3riversarchery.com/steel-screw-in-field-points-heavyweight.html

Thanks, Frank. You’re the best!

Ace archery tackle has them, I bought some today.

If you have already registered, please

sign in now

For new registrations

Click Here