As you read the rules please remember this thread is intended to swap something you have, or are looking for, to another person for something they have, or are looking for. It is not a place to clean out your closet. When folks post a photo with seven or eight items to trade management of the thread gets difficult as things are traded off. With that in mind, please try to limit what you are offering and be very specific about what you are looking for. Thanks.

Please follow the rules. Pay attention to number 3. Things have been getting a little lax in this area.

Here are the ground rules for the swap.

1) Trades only NO SELLING, I REPEAT – NO SELLING (apparently it needs to be repeated). Sales MUST be placed in the classifieds.

2) After posting, all follow up communication should be via PRIVATE MESSAGE or E-MAIL. This applies to interested parties also.

3) ONE photo, please, for your trade items. If a person shows interest additional photos should be sent via email.

4) Please limit the number of items you are looking to trade. As mentioned above, this is not the place to clean out your closet.

5) Please list the item you are looking for in return. Please be as specific as possible rather than saying "whatcha got?"

6) Please limit your ads to five active posts.

7) If an item is gone please make a post stating xxx from mm/dd (date) is traded. This is for clean up/editing purposes.

8) You can swap non archery items if, and ONLY IF, you are looking for traditional archery items in return.

If you have multiple items in a single pic/post don’t post a single item is gone. Yes, we know it causes you more “sorry it’s gone” replies, but, since you have a multiple item post it can’t be removed without removing all of your items, so your note just adds to the thread length.

Thanks for your understanding.

Swap 'em if ya got 'em!!

TRADE -1/2 dozen Legacy 2018 shafts with inserts for the same in 2016 variety..

NcStar 6-24x50 AO illuminated reticle includes rings. Great shape, got it for a rimfire build that didn't pan out.

Looking for 40/45# black hunter limbs.

I've got a great shape, 2 point Zipper wood quiver and a pile of new 2 blade Zwickey Deltas.

Looking for a strap on quiver, Thunderhorn small fry Lynx, Great Northern strap on kickback with long hood, or EFA with totem and kickback options.

70# Martin Bushmaster, excellent condition. Shoots a heavy arrow with great authority! Looking in the opposite direction, for a Bear 48"Super Mag 50-60#. Will consider other trades as well. Thanks!

Lh snowshoe longbow! Marked 40@29 pulls c43@29. Looking to trade for a couple bitzenburgers, a 6 arrow jojan+$, a feather burner, 45# lh bow let me know what yall got. Really fast for poundage never cronographed it but the thin limb design and hard r\d pushes a arrow really well.

Bear takedown limbs One set of #3 two sets #2's Brandon Stahl rose oak and Grayling. Looking for a Remington 700 ultimate muzzleloader. Thanks

Trade SA V 60” 54@28 for Flintlock muzzleloader

I have various wood arrows to trade. I want to trade them together, not separate. From right to left, 10 55# spine 31.5", 3 unknown spine Bear arrows 32.25", 2 unknown spine but I think 80# Rose City Archery 32.25", 9 other arrows that include 3 Bear Flu-Flu's 31.25" and 6 others that are 29". Looking for 200gr screw in broadheads in good shape.

Posted this real late in October, so I'll try again... Just puttin' it out there....

I’ve got my eyes open for a couple of bows....

One would be a good R-D/Hybrid longbow/flatbow that will draw to at least #60, and probably #65 or so at my 26.5”-27” DL. I really like 62” bows, but I could go a little longer or shorter. Sorry if I’m being overly specific! LOL

Would be delighted to consider a Whip, Stik, Savannah, Bamboo Viper, Venom, or the like. Idea is to get a power upgrade from my #55@28" Howatt Hunter B-50

The second would be a lightweight recurve probably high #20s-low/mid #30s - for use by a boy under 5' tall who has outgrown a #20@24

trade rh,40 or 45lb sage for 40lb ,rh,kmag

Well , going to try again. Up for trade is a old western Bowie, 9 inch razor sharp blade.would be interested in a EDC folder or?

Mathews ultramax compound for recurve or longbow. Nothing overly long. Anything under 55#. Ultramax is 70@29 and I can include all accessories ready to hunt. PM me for more info. Thanks

I have a Rodney wright firehawk 58@28 would like

To trade for a lighter weight bow say 40 to 45lb But will entertain all offers i can text pics my number is 740 542 2533 thanks

Reposted. For trade is a brand new never used LEFT HANDED Safari Tuff Duiker side quiver with cover. Looking for 65-70# spine Cedar or Doug Fir shafts. Two dozen would be fair. Thanks for looking. Frank

Thunderstick III 64" 55@29/52@28. Looking to trade for a Excalibur crossbow. Can text pics at 313 434-5874.

Also trade one of the above wood arrows for : Tru-Fire Hardcore Buckle Fold-Back release Scott Archery Talon release Blackout Twilight Single-Jaw release

I’m looking for some of the aluminum camo patterns that aren’t made anymore - like advantage, mossy oak, trebark- in sizes 2016 and 2013. I have a lot of stuff to trade. Maybe we can work something out. Thanks, D.

Have my PSE archery Research AR32 for trade. 60-70# draw length modules for 26.5-29.5”. Ready to hunt with sight, rest, peep, string chubbs, and 6 Beman ICS Hunters cut to 27”.

I’d like to trade for a Bear Super Grizzly 45-55# or a nice longbow around 58” around 45#. I’d entertain offers of almost any nature. Just ask! Call or text if you like! 770-815-1544 Thanks!!

I have a LH Morrison Shawnee L/b I would like to trade. The bow is 62" and 56#@28 about 58#@29". I need a good recurve in the 45-48# range at 29". I hurt my shoulder and I can shoot a compound, but not shooting my recurve is killing me. You can send me your phone # or email and I will send more pics.

Thanks, Rick

Sorry a little more info: the biw has black limbs that are carbin and bamboo. This is the fastest LB I have ever shot and I love it, but I will not be able to draw anything this heavy.

Thanks, Rick

I have over two dozen Axis 500 29' long with 75 gr brass insert and Red and black 5' fletching looking to trade for a woodchuck taper tool. I can text or email photos

I would also consider 2 packs 2 blade Zwickey Eskimos 125 grn still in the old paper pack Thanks. For the 8 Gold Tip 5575 Traditionals.

I have 2 bitzenberger right clamps trade for 2 left clamps thanks

I have 6 new ready to shoot 2219 game getter arrows, and 6 matching wood arrows with field pts. Feather fletched. Nice arrows, but to heavy for me. What do you have to trade?

I have these 2 Bear quivers I would like to trade for 1 left hand double spring arm Bear quiver model.

Blackwidow recurve SA trade for a smoothbore flintlock 60” 54@28 Can add some $$

Looking for medium ILF limbs that would make 45 to 50# on a 21" riser. I have a set of omp smokey mouNain hunter limbs (sage) that are 55#. Also have a Black Hunter/Galaxy longbow, 60" rh 46#@28". Trade either or both depending on value of ILF limbs.

Hi guys,

I have 10 NOS 2219 Autumn orange arrows with vanes,I also have 2 dozen GG2 nos cut to 31. I have a kme sharpening jig, 6 NIB grizzly kodiak 200 grain glue on RW broadheads. I have some NIB 125 grain judos as well. One more thing, I have 3 centaur LW broadheads at 160 grains. Great condition, they just whistle too much for me.

Looing for simmons landshark glue on 165 grain broadheads. Looking for 5 inch parabolic feathers. Always looking for wool stuff too. 36 waist 32 inseam, L/xl tops. Maybe some hardwood arrows 80-85 spine?

Thanks for looking.

ive got a win and win black wolf with long 45lb limbs id like to trade for a 3 piece recurve or longbow 60-64" and 48-55 at 28.

also have a black bear warf riser id trad for 150 grain broadheads.

text me at 917 428 2151 if interested.

ive got a half dozen beman ics bohunters 400 spine full length with red and white 5in trueflights with white wraps...looking for 500 or 600 spine shafts, or trade and ill add cash for a cheap metal Chinese ilf riser

I have a old BDU Field Jacket from my skinnier days. It’s in good condition and is a Medium long size. Could use a sheath/belt knife or something similar.

Ribtek heads 6 160 grns 10 145 grns these are new never shot

Trade for a dawgware quiver Simmons heads ILF short or medium recurve limbs spotting scope

Woodsman ELITE 3-Blade Glue-On Broadheads. Sharpened by Ron at KME and sold by Three River Archery. Snuffer screw in 125, Big Snuffer's don't think they were ever sharpened. Weight 158 158 152. Bear converta broadhead adapters 12 per pack. One pack has 8. 3 Bear weather rests right hand. Looking for 2213 shafts prefer full length or 30 BOP no uni bushings. Also consider 2 packs of Zwickey 2 blade Eskimo's 125 in the old light green paper pack. Thanks Mike

I have a 62"47# tomahawk thunderstorm and a 60"58# pronghorn t/d i would like to trade one of them for a great Northern lil creep or possibly another great northern model around 55#s must have index grip

WTT nice leather back quiver for a Hill Style back quiver right hand

I have a Summit climbing tree stand up for trade. Excellent condition, used only a few times. Comes complete, backpacking straps, connection line, foot holds, securing strap. Looking for a Bear Super Mag 48", 50 -60#. Willing to drive 2-4 hours from the Greenville, OH area to trade; shipping would be a nightmare. P.M. or [email protected]. Same goes for Martin Bushmaster above. Also have a ghost blind I am willing to trade. Thanks for looking.

Damon Howatt Mamba Left Hand 55@28- 58. The Mamba has a small grip, factory inserts for quiver and arrow rest. Comes with a three arrow quiver. Looking for a long black powder gun, CVA mountain rifle, Lyman- Great Plains rifle, 45,50,54. Or a Left Hand longbow 45, 50, 55. Can send more pictures in a couple of days. Thanks Ed (songdog)

Trade these 6- 2117 Easton Camo Hunters that are 30 1/2” from throat of nock to end of arrow for 6-1916’s,2016’s or 2114’s that are at least 30” from throat of nock to end of arrow

Neet longbow sock, will fit up to a 66” longbow, like new.

Would trade for a large Bateman or Black Widow right hand split finger tab in new condition

Please remove my listing from November 11 as the bow has been traded. Thanks Ed (songdog)

Great northern strap on quiver,5 arrow. Looking for a recurve quiver for a black widow..

Nice quiver, would trade for?

Up for trade, Whitewater Outdoors fleece jacket. XL size, very warm and wind resisient. Other camo and plaid clothes as well. Woolrich chamios shirt,camo jeans, Black and white plaid fleece lined jacket, all XL. Looking for some CE Heritage 250"s at least 30" long. I can send pics to a phone the easiest. Thanks John

Would like to trade the following items for a Bear Grizzly 40- 45 lbs

Lee Challenger Press, Lee Powder Measure, Lee Powder Scale, Lee Reloading Manual, RCBS Carbide .38/.357 Dies, Lyman Digital Caliper, Lee .357 Case Trimmer, 300-.357 158gr. Lead RN Bullets, 40-.357 158 gr. Hornady XTP Bullets, 100- .357 180 gr. Hornady XTP Bullets, 30- .357 150 gr. Nosler Soft Point Trophy Grade Bullets and 100 Empty .357 cases.

I have a left hand Black Widow PMA greybark with a low wrist grip for sale or trade. 2 sets of limbs. 50#@30" (45@28) and 42@30"(37@28). Looking to trade for 2 or 3 piece longbow or recurve of equal value 45-50# @ 28". Thanks,Bill

Here is my Jack Howard Gamemaster 66", made mid 60's as dated by Kelly Peterson. It is right handed, 51#@28", camo paint on belly. I removed camo paint(very carefully I might add) on the back so it is a nice satin black. Has a few bumps and bruises for being a 50 year old bow that has been hunted with. Absolutely nothing that would affect anything in terms of hunting with it or shooting it. Shows very light wear actually for as old as it is. I have shot it a lot over the past year or so and it is really a very nice hunting/3D bow. I had the bow weighed on a bow scale, came out to just about 53#@28". I am shooting 55/75's carbons out of it with judo points and 190gr Ribtecks cut to 29" and it is a rocket with these arrows. I have the original string, a new "original" Howard string on the bow and a flemish string too. Feather rest that is new and two to be included with the bow. Will ship in a shearling case.

Looking for Schulz Natural 55-60#@27-28", 64" or 66" long, Pete George Timberline same specs, a Black Widow MA 56-60" same weight, Sunset Hill same weight and specs., Skookum longbow or recurve same specs but 64-66" long etc.etc., Miller Sage same as above. Don't what else I would want but give me a shout. thanks

Just as an addendum to the above, interested in a Hill, Juniper bow but looking for 64", bamboo/juniper, very slight or straight grip same draw weight and in excellent condition. thanks

I have a dozen pristine, never-shot Beeman ICS Hunter 400s cut 27”; 5” parabolics, professionally fletched.... Vibrake inserts.

Screamin’ deal if you can use ‘em...

Would like to get a dozen good shafts or arrows (500-600 range or equivalent)... something that feels pretty much even-up, anyway ;)

Also still/always looking for a good #30 or so....

I am looking for a custom muzzleloader flint or percussion in 50-54 caliber. Right handed. Rifle must shoot round ball only!! I have a lot to trade from modern firearms mostly new to one Black Swan recurve. 52" and 49#@26" RH. The bow is 2013 model in perfect condition. I have plenty of pics. If interested let me know.

Happy Holidays to all!

Dick Palmer bow 58” 45@28” 13 custom cedars 3 broadheads and 7 2213 great northern quiver setup to shoot off shelf has the threads for a elevated rest .... looking to trade for ilf limbs or riser or a Longbow or a Stan shootoff large release or ? Pics won’t load text (614)421-817three

I have a pile of new Mowok dot broadheads and 200 grain left bevel grizzly Kodiaks.

Looking for 175 Grizzly instincts.

6 never shot 235 grain left bevel grizzlys

Trade for 65/70 woodies

Looking for a bow mate elite quiver or other non leather side quiver.

Wood shafts and broadheads for trade

Custom Glock 20 10mm auto.

I bought it new 9/29/17 and had Patrick’s Gun Shop of Shreveport, La. do the custom work.

*Cerakote full gun in kryptec highlander camo. *Grip reduction with finger grooves removed and trigger guard undercut. *Stippled grip after cerakote for the two tone look. *Slide professionally milled to accept Trijicon rmr sights. *Extended slide release. *Gunfighters Inc. Kenai Chest Holster in matching kryptec highlander camo.

Comes with case and all paperwork, receipts, extra mag, and brush. I’ve shot 2 boxes of 50 rounds ammo through her.

I have $1,262.00 invested in the gun and holster.

Would like to trade or partial trade for a RH- Centaur Chimera (TD preferred) with specs of 58”, 45-50# @ 28”

May consider other high end bows in the same specs.

Thanks .

Up for trade, very nice Woolrich vest. 80% wool, fleece lined. In great shape, no tears or holes. Nice dark green color. Looking for some CE Heritage 250's at least 30" long. Maybe someone could make me some? Thanks John

Sorry, vest is an XL John

I have some Swiss Surplus wool pants. When I measure the waist side to side I get 36" waist. I try them on and they are too small, I wear a 38" waist. The size is about 35-36" 1 pair is 30" inseam and the other is 29" inseam.

Trade for pretty much anything pocket knives(buck, case, swiss army etc) broadheads. Make an offer,

I have some more of these pants. They were supposed to be 38-40" and they are more 36-37" waist pants.

They smell a little musty from storage but are supposed to be unissued pants, They do look new

I have a dz Autumn Orange and Camo Hunter 2018s and 1 dz camo hunter 2117s with the swaged nock end. Will trade for knives, Bear stuff, and other neat trad archery items.

I have 2117 Aluminum arrows 5 autumn Orange, 5 XX75 camoed, 4 new Carbon Express and 1 green gamegetter. The CE arrows are basically new, the others are older and have been shot.

A quick roll on a flat counter looked really good.

I also have 6 new old stock 2413 XX&D Superlite camo shafts, nocks and inserts installed, They are full length at 33" long and no fletching

trade for knives, carbon shafts, feathers, broad heads. make an offer, I probaby say yes,

A couple of dozen full length Autumn orange 2413 XX 75 full length with orange nocks and inserts.Interest in GT 500 or 600. Maybe even some woodies or aluminum in the lower range.

Still looking for some vintage aluminum arrows or shafts. Size 2016 or 2013. Must be at least 29”. I want some of the older xx75 in discontinued camo patterns. (Advantage, mossy oak, super slam, etc). I have a brand new big Jim side quiver to trade.

Saxon Kadiak, 62" 50# (actual more like 52.5#@28) in good to excellent condition. Veneers on the facing limbs, brown glass on the back. Straight, no holes. Just too heavy for me.

I'd trade for a 64" Super Kodiak, 59 or 60 Kodiak, or 63 Kodiak, or Deluxe bow, possibly others, all would have to be around 45# or less. As low as 30# is fine. If you want this bow let me know what you got.

Thanks,

Shandor

Knife for a knife! Solingen Germany Rostfrei Unimart stainless steel gentleman's knife with case. For an old vintage American made pocket knife.

17 Blackhawk 4000 Vapor Carbonwood Arrows cut 30 inches with 5 inch feathers. Trade for 2 doz Gold Tip 500 spine woodgrain shafts.

Custom rich emery stik 60in [email protected] built June 2018 looking for a tradtech Titan 2 riser in good condition

I have a set of 26# Uukha Ex1 limbs in medium. They are in very good condition, just the usual mounting marks. I would like to trade these even for a set of EX1 longs in 34 or 36 lb.

Gerber silicone carbide two sided sharpening stone. Medium and fine. With Walnut wooden case. If it was used. It was very little. It's in very good shape. I'm looking for vintage American made pocket knives. Case, Schrade, Imperial.

Eight Carbon Express Maxima Hunter 250 arrows. 4-Fletch with 2" vanes, nock collars and nocks/inserts installed. 28 inches from valley of nock to back of point.

Trade for Easton XX75 2314 aluminum arrows/shafts with uni-bushings installed and inserts included. Arrows/shafts must be at least 28" VON to BOP. Thanks!

I have a mint LH Bubinga Bear TD B riser with matching 50 lbs #1 limbs. Would anybody be interested in trading this bow for an A riser with limbs? Looking to lower weight also. So 40-45 lbs. Thanks.

Looking for Black 2312 X7 ‘s. Have about a jillion arrows to trade or some bows. Need to to be at least 30 1/2” from uni bushing. Used is ok just have to be straight and no dings or dents. Arrowchucker

Hey all. I have a rh black bear riser with hawkeye plates, that have never been used. The riser was painted black by the previous owner. I unfortunately do not have the grip for the riser anymore so I was using black tape on it. I was looking to trade these for a victorinox one handed trekker or sentinal with a straight edge. The site will not let me post pictures from my phone but I can send some if you are interested. Thank you

Hello, I would like to trade my 64" 36# @ 28" take down PLV for on in the 40-44 # range. Thank You

Would like to trade Like new fired 6 times Remington 700 Mountain ss, with Japanese Nikon 4-12, Talley lightweight rings and 3 boxes of ammo. Looking for 50-54#@28" Black Widow PSA 62" R/H, maybe consider PMA. Can Text more pics.

Thanks Dave

Sorry Above rifle is 30-06

Rifle post reminds me that I have a fair amount of brass to trade in .45/70 & 7-08 Rem.

Looking for a nice bow around #30-#35 @ 28” for an up-and-coming archer, or arrows from 1916 through 2018 or 2114; also 500-600 carbon would do and/or comparable woodies.

Let me know what you’re thinking and we’ll work something out!

If you have already registered, please

sign in now

For new registrations

Click Here