Traditional Archery Discussions on the Leatherwall


Which spine selection chart is correct?

Messages posted to thread:
Brian waters 20-Mar-18
Viper 20-Mar-18
reddogge 20-Mar-18
limbwalker 20-Mar-18
George D. Stout 20-Mar-18
bigdog21 20-Mar-18
bigdog21 20-Mar-18
George D. Stout 20-Mar-18
George D. Stout 20-Mar-18
Jim 20-Mar-18
Trillium 20-Mar-18
M60gunner 20-Mar-18
From: Brian waters
Date: 20-Mar-18




Im toying with aluminum arrows. And depending what chart i look at im pointed in different directions. Some charts say 1716,1816, 1916,and 2016. Im shooting between 30-38lbs, 27" arrows. As a side note, ive also been toying with 1820 nasp arrows. I have no clue how nasp shooters can get those heavy shafts to fly right, even out of their low poundage compounds, wow.

From: Viper
Date: 20-Mar-18




Brian -

Assuming a standard recurve and 29" arrows/nominal weight heads, 30# = 1716, 38# = 1816, break point is around 34-35#.

1820 "nasp" arrows were sold to be shot with Genesis bows, set close to center shot. Flight is never perfect, but with brats, you have to weigh flight with durability. Yes, a 30" 1820 = about 50#.

Viper out.

From: reddogge
Date: 20-Mar-18




I was just a range official at a NASP tournament and I saw horrible arrow flight out of some kids and great arrow flight out of others. Seems the 6'+ boys with long 31" and 32" draws got a horrible flight but the smaller kids got good arrow flight. Those Genesis bows may be compounds but they have no let off and are 20# bows.

From: limbwalker
Date: 20-Mar-18




reddogge, if you overspine a bow enough, it will essentially remove the paradox and the arrow will fly like a missle instead of, well, an arrow.

From: George D. Stout Compton's Traditional Bowhunters
Date: 20-Mar-18




reddogge, they are cut well past center. At 20# since they alread are at center, they don't need to bend and there isn't enough power to force a bend on them. . Centershot...where the arrow rides in the center of the bow...there is no need for spine. The big kids were just pulling them further and applying more weight to the arrow over a longer distance. And frankly, you can't make one arrow that will work well from 24 to 30 inch draws at different weights from the same bow.

NASP arrows are made to take bad shots yet fly well enough to hit the target. Try those so-called kids arrows out of a 50# bow at a 28" draw...29" arrow and you will be closer to tune.

From: bigdog21
Date: 20-Mar-18

bigdog21's embedded Photo



Easton chart

From: bigdog21
Date: 20-Mar-18

bigdog21's embedded Photo



this is the one I use for recurve bows

From: George D. Stout Compton's Traditional Bowhunters
Date: 20-Mar-18

George D. Stout's embedded Photo



From: George D. Stout Compton's Traditional Bowhunters
Date: 20-Mar-18

George D. Stout's embedded Photo



From: Jim Compton's Traditional Bowhunters
Date: 20-Mar-18




Here is a link for Kelly's arrow chart that works real well. www.arrowskp.com

From: Trillium
Date: 20-Mar-18




Stu Miller's spine calculator works well for me. There is a similar calculator at the 3Rivers website. I like the calculators because I can build a "virtual arrow" (or several) that will be pretty close to spine before I plunk-down cash for a set.

From: M60gunner
Date: 20-Mar-18




I use 3R’s calculator as well. It’s a good start so far. But be cautious you can get more than a couple possibles by changing one or two inputs. Know all the info it asks for sure. Guessing at an input can change the results. Been there done that.





If you have already registered, please

sign in now

For new registrations

Click Here




Visit Bowsite.com A Traditional Archery Community Become a Sponsor
Stickbow.com © 2003. By using this site you agree to our Terms and Conditions and our Privacy Policy