Santa left you a brick? - TRADE it out!

As you read the rules please remember this thread is intended to swap something you have, or are looking for, to another person for something they have, or are looking for. It is not a place to clean out your closet. When folks post a photo with seven or eight items to trade management of the thread gets difficult as things are traded off. With that in mind, please try to limit what you are offering and be very specific about what you are looking for. Thanks.

Please follow the rules. Pay attention to number 3. Things have been getting a little lax in this area.

Here are the ground rules for the swap.

1) Trades only NO SELLING, I REPEAT – NO SELLING (apparently it needs to be repeated). Sales MUST be placed in the classifieds.

2) After posting, all follow up communication should be via PRIVATE MESSAGE or E-MAIL. This applies to interested parties also.

3) ONE photo, please, for your trade items. If a person shows interest additional photos should be sent via email.

4) Please limit the number of items you are looking to trade. As mentioned above, this is not the place to clean out your closet.

5) Please list the item you are looking for in return. Please be as specific as possible rather than saying "whatcha got?"

6) Please limit your ads to five active posts.

7) If an item is gone please make a post stating xxx from mm/dd (date) is traded. This is for clean up/editing purposes.

8) You can swap non archery items if, and ONLY IF, you are looking for traditional archery items in return.

If you have multiple items in a single pic/post don’t post a single item is gone. Yes, we know it causes you more “sorry it’s gone” replies, but, since you have a multiple item post it can’t be removed without removing all of your items, so your note just adds to the thread length.

Thanks for your understanding.

Swap 'em if ya got 'em!!

LH 2013 reproduction Fred Bear 59' Kodiak. Amazing bow and excellent condition. 45@28 60" gloss finish. Looking for left haded. Looking for same bow but 40@28. May consider a green stripe TD riser.

128 natural rw turkey fletch some shield some parabolic all need finish sanding, all 5” long, also 40 lw 4” black shield feathers.. trade all for 1916 bare shafts, near razorjeads, thunderhead 125’s, large duraglove or?

15-1916 Legacy, 12-1816 Camo hunter, 6-Beman Centershot 500, CE Heritage 2-90 and 1-75, all shafts are full length. Large mix of glue on nocks all sizes. Snap nocks in all sizes and lots of colors. 9/32 classic nocks 4 colors. Black and white x-nocks. Pearl white CE .234 nocks. 20-1816 nock adapters. Looking for 4” Parabolic LW Trueflight or natural barred turkey feathers, Gold Tip Trad 400 or 500 shafts, CE Heritage 150 or 250 shafts, Easton 3D super nocks, 200gr 2 blade screw in broadheads.

I have a red plaid/blaze orange large woolrich coat and 36x30ish red plaid johnson mill wool pants, and a new 6 pack of left bevel 200 grain Grizzly broadheads. Looking for good wood shafts in the 65-70 neighborhood.

I want to trade my LH GN Bush Bow 60” 55# @ 27” for a LH Hill style longbow 66”~72” at 45#~65# @28”....

Santa was pretty good to me this year, so you guys with coal-burning stoves with have to talk to your compound-shooter friends about fuel...

But I do have this little Bear bolt-on: Pat. No. 2,464,068. Leather (?) hood is in such good shape that I’m not sure it’s really leather, although the foam inside is pretty well shot. Holds 3 arrows on the front and a 4th on the back, just so long as it’s a 2- or 4- blade. It probably needs a modest realignment

I also still have a pretty good quantity of once-fired brass in .45/70 and 7-08.

If you shoot vanes, I have nearly a gross in 5” and 3 dozen 4”

And a Saxon Archery 16-strand, 62” recurve string; bought 2 and I never opened the pkg. on this one.

Still looking for a good lightweight recurve or LB for my wife and/or 13-year-old - probably around #30@28 or a bit less, but anything from #40 on down could be of interest (RH or ambidextrous).

Also interested in the following - could be a great opportunity to clean out your old arrow bucket or empty a few compartments in the parts box...

Pin Nocks

Uni-bushings or glue-in BH adapters for 2114 or 2117

Fletchings - just about any size/color feather can find a home here

Shafting in 400-600 or 1816-2216 range (needn’t be full length, but straight, sound and at least 27” for carbons and about 28” in aluminum)

Heavier 2-blade Ace Standards or Super-Express

11/32 steel blunts

Cordovan leather remnants - looking to make myself some small/medium SAM tabs, so not real small but let me know what you’ve got.

Grain scale (balance beam is fine as long as it’s accurate) Maybe a reloader who has gone digital would like to swap for some brass??

Large-diameter aluminum shafts/point adapters for footing 11/32 woodies - 2514s seem to fit pretty well. These needn’t be straight the full length, so long as they can be cut down to shootably straight lengths of a couple inches.

Think that covers it for now, but let me know if you have any other ideas...

I have 3- 180 LW Centaur Broadheads. One has been shot and sharpened. 10 Autumn Orange 2219 NOS arrows with Vanes 33". I have 5 Autumn Orange 2219 Shafts 4@ 33" 1 @ 31".12 GG2 NOS with Vanes with inserts 32" I have a Predator Camo Union Suit Size XL fits like a large, it was made by dakota outfitters. Good condition. Cotton. KME Sharpener VGC. Rancho Safari Catquiver VGC. I have 12 premium cedar arrows from lost nation 45-50 spine. Fletched, 6 have field points. Very good condition, only 2 have been shot. Thunderhorn Small Fry Leather Quiver VGC.

Looking for Howard Hill broadheads, 160-180 grain glue on. Simmons heads 160-180 glue on. CX Heritage Shafts 350. Cedar or hardwood shafts 85-100 Spine. Asbell wool or Filson wool. Spine Tester and Woodchuck Taper tool.

Thanks For Looking.

Looking to trade My Lone Wolf Autumn Storm that is 50#@28” and 62” long All Osage limb core and riser with a “crown jewel” inlay in riser and leather wrap on grip.This bow is very clean in condition and hardly hunted with with very tiny limb tips. I am only looking for a Thunderhorn Heartstopper in a lower 40 pound weight range in same condition and a 60” or 62” length if possible. Like to find one with elk tips as well and can be a takedown if that is what you have .Thanks and not wanting anything else just a Thunderhorn .This is a right hand bow and also need a right hand.

I have this bowie knife made in soligen germany new condition to trade for 65 70 cedar shafts or other wood shafts or left wing feathers

OLD School, Used, but in very good condition. No holes or patches. Coat is a large and pants are large, with zippered legs. I would love to keep, but my belly got to big for the coat. :) :) Would trade for a Galaxy Ember long bow or recurve, 30 to 40 lbs. Rt handed. Can send pics of pants.

Fleece!

Tanasi warrior,trade for low poundage Bob Lee take down,tanasi is Rh 46 lb

I have a Selway rawhide slide on recurve quiver in very good condition that I would like to trade for a Great Northern Sidekick quiver. More pictures available if interested.

This is a Remington 870 Express Super Magnum 12 gauge. This will shoot 3.5’s. There is tru glo sights I put on and has a full choke. All set to go for spring turkey or predator hunting. This is a older Remington in excellent shape when there was quality control. I have two and this has just been sitting in the safe. I’m looking for a VPA ilf riser with limbs. Would consider some other trades as well.

Must go trough a FFL

I have wood arrows to trade. In the pics are 32 40-45# spine. Lengths from 27-30"

I also have 23 spined greater than 60#, Once they were over 60, I wouldn't be shooting them so I didn't sort them finer. Most were 65 if I recall. They range from 27 or so to 32" long.

I have 29 spined 45-50#, 28" to 32" long

and 5 in the 50-55# range 29"+

Would trade some or all for knives, and carbon shafts/arrows 500,600 or 700 spine. Other items considered too

I also have 100+ field tips for wood arrows mostly 100 gr, they are all mixed together now.

Some of the heavier shafts have some older broadheads on them

Nemah 63#@28 54" bow. Great condition only a few scuffs from actual use. Took it hunting a few days this year and it's a little more weight than I'm comfortable with. Include 12 gt traditional setup and new string. Looking for 50-55 takedown in similar great condition.

Looking for shotguns or other nice left handed bows in lower poundage.

T/C Encore Black Composite Pro Hunter butt stock with LimbSaver recoil pad in trade for a doz. CX 150's cut to 29.25" with fletching and nocks.

I have a GFA side quiver I am looking to trade for 135 grain Zwickeys or right wing 5" traditional barred feathers.

GFA quiver is missing the hood material and the foam probably should be replaced. It has the larger diameter arrow grippers.

Eight Carbon Express Maxima Hunter 250 arrows. 4-Fletch with 2" vanes, nock collars and nocks/inserts installed. 28 inches from valley of nock to back of point. Two have Nocturnal lighted nocks installed.

Looking for 175g Simmons Sharks broadheads, 100g Muzzy 3 blade broadheads, Cranford Rope-On Tree Steps, or XX75 2314 shafts at least 28" long.

I have 74 assorted used aluminum arrows. They include 2117, 1916, 1914, 2013, 2018, 1816 and others. The pic is here

https://photos.app.goo.gl/gBdUAumrqASoJp9w6

It was 4lbs of shafts. I culled any very obvious bad shafts. I haven't shot aluminum in a while

Would trade for 1-1.5 dozen carbon shafts 500/600 spine, at least 29" blems ok

I have a Great Northern strap on quiver that I would like to trade for a bolt on GN quiver.

I have a Benchmade survival knife I will trade for some 155gr right bevel Grizzly broadheads.

I have 2 warfable risers and a set of PSE limbs that possibly coule be made into a frankenbow.

The one riser is a York, I was going to try and make a longbow riser out of it. The second is a PSE (I think you can bolt in a set of Sage limbs, but I don't have a pair to try)

The limbs are PSE, they had cheap rubber tips and they slid off, I glued some fiberglass tips on, but have not finished sanding them down. They are 55# limbs. The riser and lighter limbs I had for these sold and the person didn't want the heavy limbs.

Would trade all the above for a warfed black bear, a warfed Whitetail II, on of the cheap chinese risers off ebay, a sage... Would also consider leather quiver, armguards etc and other stuff. I am just clearing out some projects I do not see myself finishing in the near future so make a reasonable offer.

Trade my forest ninja bow 49 lb right hand,red cedar cocobolo riser,for a super Kodiak 40 lb or less,

64 in right hand

Vintage model# 839 two tone Brown Ben Pearson top grain leather quiver with zipper pouch. Arrows and bow not included. I'm looking for a plain back quiver. Nothing fancy.

Looking to trade this Browning Cynergy 12ga shotgun. Gun was bought new in December 2017 which puts it just a year old. It’s been shot 300 times at most and has a few light scuffs on the barrel from rubbing on the pit blind. I have detailed pictures of the scuffs I can send. It shoots 2 3/4”, 3”, 3 1/2” shells

Paid 1,700 for in when I bought it, I’d say it’s respectably worth 1,000 - 1,200 on a trade value

I’m looking to trade for Schafer Silvertips only. Daves bows and especially interested in original Paul bows. Take downs or one pieces 60” only, preferred old school camo limbs #55–#65 @ 28”

Pm me Text 337 438 1636 [email protected]

Thanks

I have 105 +/- Stotler 11/332" HOT PINK Mid nocks I'd like to trade. Hot pink Classic Bohning would be okay in a mixed bag of 5/16" and 11/32". Maybe some 175gr. BH adapters that screw in aluminum/carbon arrows? Thanks for looking! Scott <')))><

Have a dji spark drone I would trade for a longbow or recurve. Nothing over about 55 tho. Spark has 3 months left on dji care. You can total it twice in the 3 months and they will replace. It is the fly more pack. Has extra battery and controller.comes with smartphone that I just used with drone. Text 9313107941

I have 100 Easton 3-D nocks in colors of lime,orange,black and white for carbon shafts that fit a 15/35 or 35/55 sized shaft let me know. I am looking for a New dozen 1916 or even 2016 legacy shafts. These look like more like a bohning shape nock but are Easton 3-D super nocks.

Pictures of the Easton 3-D Super nocks

Want to appologize for describing the Easton nocks as 3-D cause I thought they were. They are the Stanard Easton Super Nocks as written on one the packages I saved when I got them if anyone is interested or concerned.

Sorry, Forgot to mention that most of the clothing I have is XL or 2x. Thanks John

Hummingbird Kingfisher 3 Piece Recurve. RH 60” 55# @ 28”. It’s in really good shape and a great shooter, I’m just more of a longbow guy and this just sits on the rack. I’d like to trade for a RH 3 piece Longbow 62”+ length and weight in the 50’s-Hummingbird, Pronghorn, Northern Mist, Sarrels, Wes Wallace, etc. Thanks, mg

Trade one of my pot style turkey calls for used ILF limbs between 30 - 40 lb draw weight. If limbs are of higher value we can make up difference in additional diaphragm or slate calls.

I am looking to trade a dozen new Gold Tip Traditional 5575 shafts (400 spine) for a dozen new Gold Tip Traditional 3555 shafts (500 spine). I can trade blem for blem or regular for regular.

Thanks, Ben

TC Encore in 460 S&W, 16" barrel with muzzlebreak, both factory and grips in pic are included. Looking for a recurve or longbow in RH 62-64" long and 50-55#@28". A&H, BW, Black Swan, Harrison, Lone Wolf, Centaur. The firearm must go through FFL.

Same as last post only with brand new in the box model 1885 Uberti. Special ordered with 32" octagon barrel, all case hardened metal, breech load. 45/70. Must go through FFL.

Same as above. All taurus, 454,44, .357. 44 and .357 are brand new still in the box. The .454 is slightly used for deer hunting. Still have original box. Must go through FFL.

TC white mountain carbine 50 caliber very good shape

pic is not mine but looks just like it

interested in 40-45 rh short longbow or recurve

Looking for a rh great northern less than 50#, static recurve, Hoyt satori, or other custom less than 50#. Can add cash for the right bow.

Have 6 half dz Rose City arrows (five half dz brand new 11/32 40-45#, one half dz 5/16 used), Detroit Michigan bear quiver. 44# tigercat and 34# tigercat. Have other gear as well to even things up if necessary.

Masters of the Barebow 2, 3, and 4 DVD's. Nearly new Duraglove, size small.

Looking for: Howard Hill broadheads, Zwickey Eskimo or Delta glue-ons. 5" LW shield-cut feathers, preferrably natural turkey or traditional barred. Interested in other things too, let me know what you have.

Nice Accushot 3-12X44 SWAT Mil-Dot scope. 30mm tube with rings. Locking target turrets. Side focus. Focuses down to below 10 yards. More a target scope, but would be great on a varmint gun. This was my airgun competition scope. Has a few rub marks but overall in great condition. Works perfectly. Sun shade included but I don't have lens caps.

Looking for 40-45 wood arrows/shafts. 600, 700, 800 carbon arrows/shafts. Maybe 1916 aluminum.

For trade 3 dozen 11/32 bohning classic nocks for 5/16 knocks. 1dozen 11/32 top hat screw on points for 175 vpa heads.

For trade, 5 2117 Aut. Or. arrows. 30.5"long 3 5" feathers Looking for wood look carbons, 400 spine ( CE Heritage, Beeman MFX Classics ect) at least 30"long Thanks John

Would like to trade this bear tape on quiver with 3 razorhead tipped arrows for a bolt on selway type quiver. Let me know what you got. The razorheads do have some rust and some dings but could be filed out and sharpened up. The quiver is in great shape and will hold 4 arrows. Thanks

Looking to trade 10 full length Easton 2018 gamegetters in camo and 1 xx75 2018 camo for an equal number of 1916's. Is is fletched which is how I got it. If you have more than I do to trade would be glad to work something out. Thanks

what do you have to trade

I have 3 new glock 30 magazines (9 rounds). Looking for 1/2 dozen 3555(500) gold tip traditional shafts, will entertain other offers also. I don't care if they are blems or not.

I would be interested in feathers ,broadheads in trade for the Gunsmithing books

Need 400 or 500 carbons 2016 or close alluminum bow fishing stuff a good 3under tab open to any ideas I have a couple if hip quivers and a barnett rhino crossbow don't really know much about it

I have a JT Storm RF/DF Longbow. 56" 55#@28 Looking for shorter RF/DF Longbow. Right Hand or maybe a hunting Rifle

Elburg Jaguar express longbow. 61#@28" 60" AMO Good shooter, has killed a couple bunnies. Has a few small cloud spots in glass.

Same Deal as above.

I will also consider trading the Hummingbird posted 1/8 +cash for a lever action.45-70 rifle. Thanks mg

I am placing my Navajo up for trade. This little bow I purchased new from Roy Hall and had it made from exotic and pricey woods. The handle and overlay are Kingwood, and laminates are quilted maple. It's Right Hand 54" and 48#@26". I would consider shorter than 54" RF/DF in the 50's weight range. 54" KB model or 56" Widow Maybe a nice ILF set up. Also consider hunting Rifle

Would consider a Benoit knife for Elburg or JT storm above

Looking to trade 6 2018 Mossy Oak Super Slams. Full length shafts with uni bushings. Looking for a Bear right hand leather top tape on quiver. In Excellent + condition. I can add some 2117 full length Autumn Orange shafts as well Thanks.

Looking to trade my like new Fedora Xcellerator 62" 51@28 longbow, actionwood riser with bamboo limbs under clear glass. Looking for a recurve in same condition and draw weight between 40 to 50 pounds

The above Fedora is a left hand longbow and I am looking for a left hand recurve.

Cabelas parka and bibs Fleece Outfitters camo Barely used Size large

Heater body suit Used twice Comes with knap sack Realtree xtra Size large

Trade for Howard hunting bow

Justin

I've got 4 dozen NOS Easton (Bear) .312 shafts, no inserts. I'd like to trade for an equal quantity of 2016, 2018, 2020, or 2117 shafts. Would also take .400 or .500 spine carbon shafts.

Medium sized Woolrich jacket. I grew it didn’t. Looking for some cheap limbs to bolt to a BB riser

Looking to trade these 60” PSA II limbs for 58” PSA II limbs. Looking for 58” 44- 47# greybark limbs

I have one each GN 5 arrow foam insert and one GN 5 arrow straight gripper for trade. Both new. May trade for a nice archery book, RW full length TF feathers , or a small pocket knife. Thanks for looking! Scott <')))><

Selway Quiver for a Dozen and 1/2 Bloodsport Hunter 20" bolts half moon nocks

I'd like to trade this right hand McBroom Mojo, 50's style recurve, for something lighter in weight. This bow is marked as 46# but pulls 50# on my scale. I need a bow about 40 lbs, right hand. The bow is less than 2 years old.

The Mojo is 60".

I have 55 lb left hand Martin stick,trade for a nice right hand samick,25 or 30 lb

Looking for some STOS broadheads. I will trade some TUFFHeads or MEATHEADS for them.

~Wojo

Is this a long shot? Maybe; but let’s try it!

Here’s what I have. A CNC router with computers and controllers. The picture is just the routing portion of what I have for it. There’s more! I’ve never used it but it has been used by the previous owner. It looks like a really cool machine if you’re a woodworker. There are lots of other parts to it so contact me for more information. The downside is that shipping isn’t really feasible so it would have to be picked up. I would meet up to a couple hours from homeboy in E TN for the right trade and to get it to someone who could use it!

Here’s what I’m looking for. High quality 3 piece LB or recurve 43-55 lbs. I usually go for shorter bows in the 56-58” range but I’m open. A 2 piece Toelke or something like it would be nice too. Don’t be afraid to let me know what you have. Really want someone to be able to enjoy this piece of equipment!

Call or text anytime with questions and leave a message if I don’t answer because I have a wierd work/sleep schedule! 770-815-1544 Thanks Russell

Haha. My ad says homeboy in E TN but it should say a couple hours from home here in E TN! Thanks Russell

Older Barnett wildcat recurve crossbow with scope and stirrup. 150lb draw. New prod and new string.

Looking to trade for a RH bear grizzly 40- 50#@28 in good shape. Prefer a newer model but open to any in nice shape.

Matt

Two books for trade. Looking for the paper back witchery of archery or other archery books, spool of B50 or orher archery items.

Hoyt Buffalo, 62” 43@28 w case. Looking for guns of most any tryoe, do have an ffl, maybe the right recurve. Just not a metal riser guy. The bow is mint.

RH Kota Nomad 59#@28" 60". Would trade for 40-45# ASL style longbow-Howard Hill, Dave Johnson, 7 Lakes etc. Can email more pics. Very clean bow.

3 Snuffer SS 125gn screw in broadheads, and 3 Woodsman elite 125gn screw in broadheads. Looking for Simmons glue on Tiger sharks.

I need some FULL LENGTH, RED, LEFT WING feathers. One dozen minimum. I’ll trade for the same in NATURAL WILD TURKEY FEATHERS, split and ground.

(12) XX75 2216 uncut shafts with nocks and inserts - will trade for same XX75 2016 camo or autumn orange shafts.

I need a woodchuck taper tool. Running or not.

I've got cresters and arrow shafts to deal.

5 1/2 inch right wing maxi Feather. 32 floor yellow, 23 yellow, 45 white, 55 pink, 72 red, 25 black. Trade for 2018, 2016, or 150 carbons, or 175 vpa heads

Ttt

I have a black safari tuff 2pc takedown longbow case. I'm looking for some 175gr Simmons Tigersharks

Looking to trade this LH Fedora Extreme 3 pcs longbow. 64",51#@29". It is in very good condition. Comes with FF string and T/D case.

Looking for a LH one piece or 2 pcs 50's style recurve between 45 & 49#@28". Thanks, Frank

(9) NEW 2018 Legacy Shafts with inserts...Trade for 2016'

40xlb Hoyt Pro; RH, beautiful woods; Like to trade for LH bow from 30# - 50#; I will top off funds needed for premium bow. More pic's upon request.

Lot's of extra points, custom arm guard, selway rawhide quiver and several other items. 50+ primary and secondary RW full length wild turkey feathers. Screw in stabilizer, predator calls, a few broadheads.

Would like to trade most of these items along with bow listed previously for quality LH bow 30 - 50#, LH side stalker quiver, ASAT Camo. I'm open to other trade ideas.

I prefer to trade these items in as few groups as possible. Happy to send more pics. Thanks. Scott

I got a maddog recurve thats maple and walnut 60"54#@28 and a super cobra jet static recurve thats 54"53#@28 would like to trade 1 bow for 2 bitzenburger left wing fleching jiggs or both for 4 or more

For trade: 2 pcs of 1.5” unidirectional carbon .020”, 1 roll of black halo .019 (made one serving from it), one set of bow blueprints from the old master crafters, 5 issues of The Bowyers Journal, 2005-2006, three issues of Trad Archers World 2011-20012. And here’s the weird one, a bag of RW goose biots (leading edge of the feather) ground and cut to 5”. These would make really cool primitive arrows. I shoot LW so I have no need for them.

Looking for: .025 halo, 3” little chopper feathers cutters, and bow fishing reel or fishing arrows. Bohning 9/32 t nocks.

Have a like new Mathews triax 70# 28” and 29” mods has brand new custom strings and cables installed less than 50 shots ago .... also has a tight spot quiver , qad hdx Mathews Rest and spott hogg double pin xl mrt and front and rear b stinger also have a carter nock 2 it release I have the packaging and paperwork on the nock 2 it , spott hogg sight and the qad ..... looking to trade for a high end super recurve prefer a timberghost black pearl but will look at High end ilf bows high end Longbow’s and Morrison max limbs and risers .... looking for nothing over 53#@28” and nothing under 45@28” This is a like new setup shooting 326fps fully tuned everything like new have over 1600 in it only hunted with a couple times this year

Would also like a border bow with hex limbs nothing over 62” long can also trade some accessories for cheaper ilf risers like halo or others thanks (614)421- 817three text or call

Goose biots are traded.

Something to ponder over. I'd like to trade an Oneida Eagle for some trad items or XL wool clothing (Asbell). It is a H250 RH, 35-50#, with a 30-32" draw length. Factory camo finish with a new string, launcher rest, and an Oneida quiver. Bow is really in great shape and would make a great bow fishing set up or hunter. Can send pictures upon request. Thanks for looking! Scott <')))><

60" 70# @26" schafer silvertip recurve for trade. Looking for a silvertip around same poundage but at 28". PM me if interested.

If you have already registered, please

sign in now

For new registrations

Click Here