Ok, for you Bear T/D shooters, what quiver do you have on your bow and could you post up a pic of it? Thanks, TW.

1984 Bear Kodiak Takedown with a four arrow single spring arm Bear quiver.

1997 Bear Kodiak Takedown with a three arrow Kwikee Kwiver.

1990s Bear Hunter TD with a four arrow Kwikee Kwiver.

1990s Bear Hunter TD with a three arrow Kwikee Kwiver.

1997 Bear Kodiak Takedown with a eight arrow single spring arm Bear quiver.

Thanks guys! I am just trying to get an idea of what I want to put on mine.

Here is my 1997 Bear Kodiak Takedown with a Selway side mount four arrow quiver. I zoomed it up.

Single spring arm for me. Hard to beat the 4 arrow model.

Depends on the Bear TD. I use a slip on Selway on my A mag riser TD. My wood A riser TD is tapped for a side quiver so I use why own version of a Selway side bolt on quiver.

Did something a little different with my Green Stripe. It has a screw mounting hole for a lower side bolt on quiver, but not one on top. To avoid drilling extra holes in the riser, I removed the medallion, which is mounted on a square post inlet into the riser, and drilled out the square hole and inserted a quiver mounting bushing. I then mount my version of a Selway bolt on side-mount quiver. When I don't have the quiver on, the square post of the medallion screws into the quiver insert and the medallion seats flush with the riser as before.

I have a Delta and a Delta type GFA that fit the factory bushings.

Great Northern makes a nice side mount quiver that fits the factory bushings.

Single spring arm quiver which is known as the Bear Converta Quiver

When they first came out in 1970 they weren't called the Bear Converta Quiver, after 1970 they were. :)

I have this old Delta but, cannot seem to find any attachment arms to put it on the bow.

I just hunt.I like an attached bow quiver.Whatever is circa-I just use a bolt on bear quiver on my Freddy Krueger.

New A riser with a Great Northern side mount

I like the GN adjustable strap on. Easy on easy off, no tools needed.

I use Bear, Delta (old Bighorn) and Great Northern. My favorite is Great Northern. Light weight and quiet.

one bolt in the riser

Nothing special.

do body uses the thunderhorn sidewinder??? I like it on my bear tds……….

Just a black rubber Sel-way slide on for my "A" Mag T/D.

No picture but I use a Thunderhorn side mount when I use a bow quiver. Had them dye it to match the red/black color of my TD.

This is an eight arrow on a Predator, but I use the same set-up on my Bear T/Ds.

Thanks to everyone! I really appreciate y'all sharing your pics, and what you are using. I found a 4 arrow Bear quiver to use with my installed factory inserts. Will post up photos once it is here and together.

Here are 4 of mine, the A riser have Bear quivers, the B risers have delta quivers

the above photo, the quiver looks like a old pse quiver, not a delta

I use a Thunderhorn Sidewinder on my A riser Bear T/D. My apology for the crappy photo.

I like the looks of that Thunderhorn! It and those arrows are a pretty good match to your riser.

Thunderhorn Lynx is my go-to!

Delta Quiver...4finger

Anyone ever drilled out a Mag A riser to accept a Kwikee Kwiver? Any tips or tricks?

Thanks

Squirrelkiller I PMed you.

Here's mine. It's a 4 arrow, designed for cedars. I put tape in the holes so I could use carbons. I shot last night with it on the bow and it's dead quiet.

Joe

Squirrelkiller

I have drilled a few bows for bushings for a Kwikee and also for Delta quivers.

I used the bushings from 3Rivers that have the shoulder...they go in very nicely.

Just follow the instructions on the bit size and centre punch before drilling. I also wrap the drill bit with masking tape to avoid going too deep.

This quiver was made by me.

A four arrow single spring arm Bear converta quiver on my 1972 Bear Super Kodiak.

Gorilla 30# Double sided tape worked!

My all time favorite for Bear takedowns but sadly no longer made. A Kanati....

I make these so you can use any AMO standard quiver.

without drilling holes in your bow....

Dan, How do them quiver brackets you make attach to the bow ?

By the way that was not my idea above! Nemophilist was kid enough to share his idea with me. Thanks so much!

Charlie

Single spring arm.

Bugle-Up what are the specs on your Bear bow and what type and weight arrow and broadhead did you use to take your elk.

If you have already registered, please

sign in now

For new registrations

Click Here