Deer season is here. I'm starting a day early because I can't post from a treestand.

As you read the rules please remember this thread is intended to swap something you have or are looking for to another person for something they have or are looking for. It is not a place to clean out your closet. When folks post a photo with seven or eight items to trade management of the thread gets difficult as things are traded off. So please try to limit what you are offering and be very specific about what you are looking for.

Thanks.

Please follow the rules. Pay attention to number 3. Things have been getting a little lax in this area.

Here are the ground rules for the swap.

1) Trades only NO SELLING, I REPEAT – NO SELLING (apparently it needs to be repeated). Sales MUST be placed in the classifieds.

2) After posting, all follow up communication should be via PRIVATE MESSAGE or E-MAIL. This applies to interested parties also.

3) ONE photo, please, for your trade items. If a person shows interest additional photos should be sent via email.

4) Please limit the number of items you are looking to trade. As mentioned above, this is not the place to clean out your closet.

5) Please list the item you are looking for in return. Please be as specific as possible rather than saying "whatcha got?"

6) Please limit your ads to five active posts.

7) If an item is gone please make a post stating xxx from mm/dd (date) is traded. This is for clean up/editing purposes.

8) You can swap non archery items if, and ONLY IF, you are looking for traditional archery items in return.

If you have multiple items in a single pic/post don’t post a single item is gone. Yes, we know it causes you more “sorry it’s gone” replies, but, since you have a multiple item post it can’t be removed without removing all of your items, so your note just adds to the thread length.

Thanks for your understanding.

Swap 'em if ya got 'em!!

trade rh kmag 48lb for a short 40lb rh bow....ron

I have a Morrison 19" ilf metal riser and 50# black max limbs. I would trade for a sunset hill 50-60# preferably 66". Also schultz, hill JD berry considered. This bow is like new so I would like yours to be in good shape too.

Looking for a Bison Gear Scout Haversack or Houndsman Haversack. I have a lot of items to trade, Columbia camo wool jacket, knives, leather possibles bag made by the Leatherman, etc... PM me if you have one and tell me what you want to trade for it. Thanks Tom

Danner Acadia 8" size 12M for trade. I wore these maybe 6 weeks before I injured my heel and now unfortunately I can no longer wear this style boot. These are a very high quality boot with Goretex and made in the USA. I would trade for a quality compact rifle scope or long ILF limbs 40-45# rated for a 17" riser or 34-38# rated on a 25" riser.

I have a 62" Rodney Wright "Firehawk" that is 56#@28". It's in very good/excellent condition. It's just not my style. I'd like to trade for a Hill bow, or Hill-style bow,,,,,,though I'm not totally averse to R/D bows.

TC Encore in .308. 26" flutted barrel and is also threaded with a protection cap. Less than 50 rounds through her. Scope rings and base are NOT included, for special scope. Looking for a Fisk or Black Swan bow. OR?? Must go through FFL? If you do not want to go through an FFL, do not bother, it is the ONLY way!

-Pentax 8x24 compact binocs. Will trade for RH strap- on bow quiver(EFA, Kanati, Big Jim)

-Military ALICE pack, frame and belt. Will trade for 6 full length Beman ICS .400 spine shafts.

-35 count LW 4" white parabolic feathers. Will swap for LW 4" or 5" shield cut feathers.

-Heavy screw-in field points (300 gr., 250 gr. and 200gr.) Also have small diameter(9/32nds)screw-in field points. Need 145 gr. 5/16ths diam. screw-in field points.

-Heavy duty non-folding screw-in tree steps. VGC full body safety harness.

I have a LH Cartel Fantom and a LH Proline Warf for trade. WOuld consider RH ILF risers,possibly a longbow or recurve mid 40's or so.

The Cartel is basically new and the Warf was done by Sam

I have a buck 119 knife with some type of antler handle and nice thick brown sheath. Paid $100 at bass pro. Will trade for etrex legend or other. Decent gps. Or other

RH 50" 60# Browning Cobra.Straight solid shooter could stand a light refinish.Probably a 7 out of 10.Looking for lighter weight short Bear KH,KM,SM.

I have a bitzenburger arrow fletcher no clamps. Looking to trade for a backpack quiver or side quiver. I also have a bear kodiak hunter 70s model. 45lb. Has two filled holes. Looks to be in good shape. Looking for a Selfbow that can handle a 30 inch draw. Make me some offers of trades.

A pic of the bitzenburger.

I'm looking for a good quality recurve 60" 50-55 @ 28". Bows on my "wish list" would be a Black Widow or a Ghost, Super Ghost, Thunderbird etc. Id consider other Recurves or perhaps a Longbow too. My Fusil is built by an unnamed builder is in great shape and fires flawlessly. L&R Queen Anne lock, 42" Octogon to round collerain barrel w/ two wedding bands. .62 cal smooth bore. I have extras for the gun if you have extras for the bow. One chip of wood on top of stock left of barrel tang that in no way affects the integrity of the gun. More pics can be sent to interested parties.

Really nice Zipper recurve RH 60" at 41@28. Looking a SS Ruger Old Army .45cal in trade.

Bear Razorhead with bleeders used but still very huntable,Looking for 2219 shafts 30" or can be cut to 30, or 125gr Woodsman screw in heads. Preferably the original Woodsman's but will consider the new ones. Will consider other trades as well.

Little Chopper Left Wing feather die sharp and in good condition. (1) 5" shield cut,(1) 4" shield cut, (1) 4" Parabolic cut. Looking for 2219 shafts 30" or can be cut to 30, or 125gr Woodsman screw in heads. Preferably the original Woodsman's but will consider the new ones. Will consider other trades as well.

I have a natural hair takedown bow case. Made from impala or some other African game hide. It has socks for limbs and a string compartment. A cant post pics until tomorrow.

I'd like to trade for some light arrows, 40-50#.

Bohning straight fletching jig,Looking for 2219 shafts 30" or can be cut to 30, or 125gr Woodsman screw in heads. Preferably the original Woodsman's but will consider the new ones. Will consider other trades as well.

The Rodney Wright Firehawk that was posted on Sep 30 has been traded. Thanks

I have a Three Rivers Recurve Case with zippered accessory pouch. Excellent condition only used a few times but it does have my name written on it. Looking for a Buck 110 or similar hunting knife in good condition to give to my daughter for her first hunt in a few weeks. Please send me a PM if interested. Thanks!

I've got a black bear riser with ILF plates put in. Looking for older recurves 64" or over and around 30-40# as training bow, or something like a carsage lower weight. Might also consider a side quiver like Asbell or a nice leather Hill style quiver. Thanks.

The Bear Razorheads and the 5" Shieldcut Little chopper has been traded. Scott

15 Bear cedars, 29.5" to full length, mostly over 30"

Looking for ace or hammer screw on or glue on blunts 150-200 grain. Also a dark colored strap on quiver, foam integrity not a big deal as I can replace it.

I have 10 Easton Axis Traditionals half are factory fletched and the other half have been refletched. Also 10 FMJ half are fletched the others bare. All are 400's and only 5 have been used. 30 inches to back of point. Would like to trade for lesser spine arrows

I have a knife with Fred Bear's signature on the handle. I was told these knifes were listed in one for the Bear Archery catalogs. I am interested in trading it for vintage rare broadheads, vintage arrows or a leather quiver. I am still looking for a look-a-like Errol Flynn Robin Hood Quiver.

8 gold tip 5575 all fletched and full length like new . Looking for 1916 shafts, thunderhead 125s or open to any offers

I'm looking for a Weatherby Wool Parka and some Xl or L size wool bibs in Columbia Wool. I have many things to trade like arrow making supplies, broadheads, (possibly a bow), and other stuff as well. Thanks

Tree saddle interested in short longbow right handed . Shrew. Also looking for black widow riser.

Or what ever else I might be interested in.

I have a set of signature Bob Lee limbs that run 61#@28" on a 19" riser that make a 60" bow. I'm looking for a quality Hill style quiver probly no deeper than 20" as I shoot 26" so pretty short arrows. Also intersted in lighter limbs if you'd like to swap. Pics by text on request. Thanks.

Looking for a Thunderhorn strap on, traditional only 500s, and a spine tester.

I have 12 POC 50-55# 27.75" half with bear razorheads.

6 500 axis black new full length, inserts loose with epoxy.

A dozen each:1716,1913,2113 xx75 camo with loose inserts

Omega imperial long bow in as new condition. I've only shot a dozen arrow through it and there isn't a mark on it. It's a two tone riser and is a very fast bow. 47@29 60 inches long. Cost me about 450 brand new so looking for comparable values in trades. I am looking for a solid deer rifle in 30/30,357, or 7.62x39. I prefer lever or single shots but, interested in bolt guns in th later caliber. I might also entertain other trades and will also pay all ffl fee's on my end. I can toss in a 3 arrow efa quiver as well.

4 sets of 65-70lb cedar arrows/shafts. 50 in total and almost all are 28 1/2" from throat of nock to beginning of taper. There are a couple shorter ones. They are straight and actually shoot very well, they are just about 1" too short for me. I would trade them all for a dozen wood arrows 55-60 lb and 30" long. I also have a dozen cedar shafts 40-41 lb spine I would trade for some 2016 or 2115 xx75 shafts or arrows.

I have a rwally nice buck knife with thick distressed leather quiver.Ipaid $100 plus for it. Never been usd. I ned to trade it for a nic strap on long bow quiver. Whatya got.

TC Encore in .308. 28" flutted barrel with threads for later addition of a muzzle break or?? Scope rings and base not included. Looking for a black powder rifle for squirrel hunting! Must go through an FFL dealer.

I have a Ben Pearson Hunter II. 45/50# @ 28" I'd like to trade it for a bow that's 58@28 or one that is 30-40# screw holes on the riser from a sight at one point. few other cosmetic blemishes from normal use.

pm me for more pictures.

Chad Orde string tracker, still looking for single bevel heads or zwickey deltas

Bear Ranger number 4, 62 inch long and around 25-30lb at 28 inch. Left hand. New string and bear hair rest and strike plate. Few holes drilled in riser where someone must have had sights on it? Limbs are nice and strait . Overall good shape. Trade for a right hand bow . Thanks

These are new with feathers 30" plus. Looking for 340 full metal jacks Easton 931 993 4960

I have a few things to trade. First is a leatherman possible bag, made by "The Leatherman" it is the Woodland w-106 model on his website site, with full leather strap. Bag measures 11x10x2 with 3 smaller pockets. Next a is a Stormy Kromer 7 3/8 insulated Ranchero hat. A pair of Cabela's wool pants, tag says 36,but they are to small really like a 32 maybe a 34 waist, 30 inseam. And last is a new CASE mini trapper. Looking to trade for a recurve in 30# to 40# range for a kid I know. Might also consider trading some on Bison gear Houndsman or Haversack. Thanks

KME knife sharpener with wood base, missing the fine stone but has extra coarse dimond stone. trade for rh 40lb short bow

Bear 76r 58",50lb,rh brown limbs ,green riser. trade for rh 40lb short bow...ron

Here are two more knives up for trade, from above list. One is a Blackjack and the other a limited edition SS Case Trapper with Gobbler carved in handle, this was made on limited run for Redhead Bass Pro

I've got a dozen 7595 Gold Tip traditional's that are no longer used. I have had to go a lot lighter. 11 have wraps and 4" right wing fletch, 1 I got frustrated with the wrap and it shows in the picture. I am looking for 400 spine shafts of the same quality. Thank you Cowboy

All you see for 1 dozen grizzly broadheads, 125 grain, left bevel to match left wing feathers. Thanks for looking.

Rocky Portland style 2081 8" leather lace-to-toe boots. These are solid. Not for a long hike, but a tough boot for short hunts or work.

Worn very little. Size 12W, but they fit narrower than I can take (I am 12EEE). No longer made. I have the laces. They sat in an enclosed wood box on my front porch for years because I just could not wear them for very long. Worn for one work shift and once or twice in the woods. A 12D or 12E could wear these easily. I bought them when I was a first responder. Now I am retired. The leather is still new looking and pliable. Lots of life in these boots. Waterproof membrane but not Gortex.

Looking for 1/2 doz GT Trad new 3555s uncut .003 shafts or arrows.

Will trade for 1 doz 3555 uncut blem shafts.

1/2 doz 125 grn glue on Snuffers, NIP, unused, never sharpened, never mounted, looking for some 160 grn LB Grizzlys,,,thanks,, mike

64 inch warfed martin warthog 50 at 28 fast shooter looking for other warfed recurves or recurves 50 lbs.

I have two quivers I would like to trade. One is a Boa four arrow strap on; plastic hood four arrow. The other is an old Black Widow bolt on quiver. The foam in the BW quiver is brand new never used. The foam inside the Boa is worn out, needs replacing. I would like to trade both for a Great Northern adjustable strap on quiver or a Eagle Flight strap on.

Ive got a brNd new timberhawk 3 piece recurve with selway quiver. 47 @28 60in bow. Real nice wood shoots great. I want to trade for a taurus or. Berretta 9mm. Like a pt 92 or 92fs.I paidalmost $1100 for bow and quiver.Text for pics 724-524-7224

Bear 8 arrow adjustable single spring quiver w/the hard to find front screw mount to attach the quiver to your stabilizer hole. Quiver is in great shape, rubber grippers are flexible. I also have a little chopper left wing, traditional shield cut 5.5 inch feather chopper. I'm looking for a black slip on or strap on quiver.

***PICTURES AVAILABLE BUT THE LEATHERWALL WONT LET THEM POST***. Keep getting a not enough room on disk message.... Not sure what that's all about.

Nice Fred Bear Converta Quiver LH. Come with stabilizer and converta bracket. I am looking for goldtip traditional 340 close to full length.

Quinn longhorn 58@28 and a Dwyer Deifant 67@28 Both RH and in good shape to trade for a Toelke Chinook, Black Widow, or Stalker recurve 50lb minimum preferred. Two bows for one. Can text pics. PM me with any offers.

Striker Sport rd longbow bought new end of summer 50@28 58in right hand looking for other bows of equal value willing to trade up or down. No longer than 60in 45-50 lbs I like bear bows would like to work a deal on a reproduction 59 Kodiak if ya got one!

My bow is in new condition 765 543 4605 feel free to call or text for pictures

Bear #1 early green tip limbs. #60 and #65 for trade.

Looking for easton FMJ arrows. All spines considered and various lengths no shorter than 28". Also looking for a VPA riser or similar short ILF riser in right hand.

1 dozen- 340 gamegetter 2315 components xx75. 32.25" to nock groove. One missing insert. One missing/busted knock.

5- Easton xx75 2312 equalizers. 34.75" to nock groove. No inserts. Will send 4- 2312 Easton carbon composite shaft inserts with them.

Looking for 2020 or 1920 shafts at least 30" long. Or maybe some open pattern camo. Asat/predator/vertigo, etc... XXL jacket/shirts. XL pants. Also need some 4 blade deltas and right wing single bevel broadheads.

Pic want upload. Pm your email or phone for pics.

Thanks! Dakota

Sorel -100 pack boots. Worn once for fit walked on carpet for 5 minutes. Advantage camo upper. I can text pictures. I am looking for 2 to 3 large Pearson Deadhead broadheads or an extra large pair of choppers aka leather mittens with wool liners. I am open to other offers.

try this again. 3 new Montec 125 never opened, side quiver for broadheads, 50 LW4" gateway. I mounted a couple and took them off the next day. still almost perfect. Moose calling tape, Knife set w/saw, folding hunter w/gut hook and small caping knife, nice nylon case.DZ brass nocksets. scent control products. Need ILF limbs almost any size, large soft bow socks for the big old 70"s 70" recurve. takedown bow case for my Bear B-riser and limbs,1516 arrows or shafts, and a partridge in a pear tree!

Wanted some 4" shield cut right wing feathers or full length any color.....just tired of running out of feathers...let me know what ya have maybe we can work something out. thanks. jeepman

I have a 52" string, need a 58" string.

I have a 57" Skinny string made by Davesonic on the leatherwall, probably had 30 or so shots on it. It fit my 62" martin hunter. I have a 58" (62 AMO) endless loop Dacron with just a very few shots on it. I also have a cordovan trad glove #4033X at 3 rivers in size medium (almost new). I would swap for a Bateman split finger cordovan tab size large and/or string (like for making bowstrings)

Looking for:

Easton X7 1714 shafts, any color is fine (old plain unfinished silver, the old "color variation" silver type, or ??), with swage nock, 29" long (nock throat to end of shaft), straight and NOT CRACKED. Old, used but good shape is A-OK. If they have glued-in target points, even better!

I'm specifically looking for Easton X7 1714s, to replace 1714s in my set that I have destroyed while "target shooting"....

Have to trade:

10 (ten) Easton Autumn Orange 2117 shafts, and 5 (five) Easton Autumn Orange 2216 shafts. ALL AT LEAST 31" from tip of insert to nock throat. All are used but straight and in still-shootable condition. Swage nock and inserts. Just need your fletching and points. ((I have more of these Autumn Orange shafts in these sizes and lengths, but the inserts have stuck field points, and I'm not going to expend the time to remove them!)). Also, still have the Vista quiver pictured in the September trade post.

Any not-being-used Easton X7 1714s out there looking to be traded?? Thanks! Aloha & 73! Randy

Black Widow 7-arrow side quiver. Leather hood has stain, but everything else in excellent, near new condition. Would like to trade for side quiver with bigger gripper openings for my 11/32" arrows. These grippers are too tight.

Looking for a paper wasp nest, in GOOD shape. Trade for this knife and sheath. I guess pics is down!!!!! :( :( !! Can send pics to your e-mail!

2 hoyt jr longbows. #56 Neet Navajo and 65# Sky Trophy. Both are beautiful. 69 inches and have identical woods. Will trade both for one really really nice longbow or recurve. 719 213 0028.

Leather bag, and Blackjack knife are gone.....

1967 Zebrawood kodiak Hunter 4 pound 58 inch. Trade for bear takedown. Text 505-620-4778

Would like to teade quiver for gt xx500 blemish shafts. The wood grain looking ones,feathers to fletch them too if you have them. Big Jim sells the ones i mean.Cant post pics right now b ut do the word (quiver) seRch and go to sept 14 post homemade quiver. Thats it. Thanks. Pm or call 765-524-7224

I have a big eastern diamondback drying probably >50".Looking for quality knives,turkey calls.

tree saddle will add some money for Black Widow bow, or short longbow, looking for right hand greater than 55 lbs less than 75lbs at 29

trade supermag rh 45lb for same in 40lb.........ron

Looking for a standard grip for a Dorado/Gamemaster riser. I'm not a fan of the low grip that they are providing now.

Arrows, BH's, etc. for trade

Above picture is the back quiver, I don't know where that bow come from

One last try the above aforementioned snake..

One last try the above aforementioned snake..

I have a set of Jeffery Royal Mag Hunter limbs. 53# that make a 54" bow on an A riser. Black glass with maple core, gray actionwood tips and wedges. I would like to trade for a set of Jeffery limbs under 60" and in the mid 40# range.

I have r.w. feather chopper traditional 5.5 inch to trade for a l.w. 5.5 inch in traditional or shield

New 3 puece recurve. Grsat bow but looking to teade for long bow 50 lb or under. Prefer slammer rstryker. Reflex deflex.

Hoyt Pro Medalist with 2 sets of limbs. I have put it together and shot both sets of limbs, but the bow needsa good cleaning. Happy to email, or text, more specific pictures and/or info. Looking for anything trad related. Limbs for Bear take down 45-55#, knives, broadheads, wool clothing, other recurves 45-55#, bear spring arm converta quiver, etc. Try me, you may ne surprised. [email protected]

I have 50lb limbs for Bear 76r. I would like to trade for 40lb limbs...Ron

WTT Browning Explorer II 62" 47lbs. for a Howatt Hunter of similar value. Looking for a draw weight of 55lbs. or less on the Hunter.

If you're on your home pc right click on the pic, hit bring it up with... paint. Once the pic comes up on paint at the top hit resize and put what percentage you want it reduced to and hit ok. If its not right do it again

I have a nice loggy climbing stand with hand / sit climbing aid. It has the nice padded seat really nice stand.Not heavy at all.Aluminum. will teade for gt 400 or 500 shafts or gps,, knives,, about anything.Text 765-524-7224 for pics.

I have a new eberl stock back pack with the rifle scabbard or can be used for takedown bow. Paid over $200 new will teade for arrows or knives. Or gps. Text for pics 765-524-7224.

Ive got a super nice hand wRming cuff that strps around waist,, has shotgun shell holders ,, warmer pocket gor hot hands and other pockets. You cold weather hu ters would love it. Never used.text for pics 765-524-7224

I have a like new 870 wingmaster 16 ga with ful choke barre. Nice wood gun looks new but i know for a fact its over 35 yrs od. Will trade for nice rd long bow or 12 1187 or other shotgun. Text 765- 524-7224

Have 30lb medium ilf cartel fiber limbs. Painted black with realtree limbsations. Looking to pick up a set of long and short limbs, 30lbs.also need 1 or 2 52" and 58" ff skinny strings. Have other length strings to trade or full length rw pink feathers.

Imeant to say 54" string, not 52

I have a pair of Camuks Extreame. Wore about 8 times. Great shape. A bit tight. These run small! Size 11. Also have extra liner and inserts. Bear A riser or a nice Grayling Super Kodiak. I could add a few extra $ to make deal.

http://www.mukluks.com/CAMUKSXTREME- 24995/productinfo/CAMUKS%2DX/#.WA1XUHT3afA

I have four beautiful prime winter red fox furs tanned as well as one huge coyote and several ermine. I am looking for used broad heads as well as 2016 and 2018 shafts. These furs are soft and supple.

I need at least 6, 125 grain woodsman glue on broadheads. I have a ton of broadheads I can trade.

BOOKS: Traditional Bowyers Bible Vol. 1 -2 -3 Paperback excellent condition

Bowhunting Alaska's Wild Rivers - Jay Massey A Thousand Campfires - Jay Massey both hardcover, both excellent conditon

Would like Damascus blade knife, or ???....can add other stuff

Tom

I have a dozen 1959 Blackhawk broadheads I would like to trade individually for other broadheads I don't have.

Looking to trade my 50# Bear Kodiak (59'er) for a 35-40# 59'er.

Dried 50"Eastern Diamondback.I probably won't get anymore until next summer.Surprise me-knives,calls,Bear nic nacs,etc

TC grey scout limited Gander Mountain edition (#131 of 1000 made).50 cal "inline" but uses #11 caps and loose powder (not pellets)up to 100 grains.Looking for equal value Bear Archery bow(s)

Looking for some RW 125 grain Grizzly broadheads. Have two packs of heads to trade. One three pack of 125 grain Muzzy SS three blade. Also, one six pack of STOS 160 grin two blade heads. Thanks for looking! Scott <')))><

Looking to trade Safari Tuff takedown case and Cartel case for Blitzenburger fletching jig. Choose from black or camo.

Looking to trade 1dozen of Beeman ICS Bowhunter arrows 500 spine with 125 grain tips for fletching feathers. I prefer left wing. Let me know what quantity and colors you have. I would like to get TrueFlight.

I've got a new 3 pack of Zwickey Right bevel no mercy heads and a new 6 pack of 2 blade eskimos. Looking for 4 blade no mercy heads or 4 blade eskimos. new or like new.

Have a selway rawhide slide on recurve quiver. Need some 1816's-1916's or 40-45 woodies all 28" or longer are OK. I'll text photos if interested.

Trade leather back quiver for 300 spine full length arrows text John 662-516-2648

I have a Polaris RH riser I'd like to trade for a Samick RH riser thanks John

I meant sage

If you have already registered, please

sign in now

For new registrations

Click Here