From: Copperhead
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
Does anyone have any ideas where to obtain a 2 lb weight to test wood arrow spine? I have a roller bearing aluminum arrow straightener/point alignment jig with micro dial. I assume I can use this same jig to test deflection if only I had a 2 lb weight?
|
|
From: 2 bears
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
A small/short jar,baby food or what ever.---fill with lead shot, BB's, washers or anything small so you can bring the weight up to exactly 2 pounds. Get it real close at home then take it to any certified scale-- post office,grocery store etc. add or subtract a few BB's for exact weight. bent wires through the lid make a handy hanger. There are many ways hope this idea gets you started. Ken
|
|
From: jk
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
I made a 2# weight by melting 2# of fishing weight into a tuna fish can. I stuck a hooked short length of welding rod in it while the lead hardened...I made a dial indicator rather than using a dial.
|
|
From: Viper
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
C -
I'm sure a google search would give you a lot of answers. There are 2# dumbbells or you can buy a 2.5# plate and grind off .5#.
Viper out.
|
|
From: Bowlim
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
I have a cut off from a brass rod. You could melt some lead scrap.
Here is a 2" piece which would be nearly 2 pounds:
http://www.ebay.com/itm/2-C360-BRASS-ROUND-ROD-2-long-Solid-2-00-OD-x-2-00-H02-Lathe-Bar-Stock-/351575114419?hash=item51db8282b3:g:YWMAAOSwwbdWQWDY
It is 11.57 pounds per foot. Add a hook and you should be pretty close. A bit expensive, but on the other hand a calibration avoirdupois weight is about 100 bucks. You can see where melting some lead in a Friskies can gets the edge.
|
|
From: fdp
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
2lb. dumbbell like Viper stated. Go to a good hardware store and get a 1 " bolt and enough nuts and washers to weigh 2 lbs, fishing sinkers, shotgun shot, a can filled with 2lbs of something. Lots and lots of options. ANd yes, they will al be precise enough.
|
|
From: Sailor
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
I took a plastic pill bottle, drilled a hole in the lead and attached a hook, placed all of it on an electronic scale and added lead shot until I had exactly 2#.
|
|
From: Kodiaktd
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
2 pound weight is easy to make like a lot of guys say here. But if you just want to buy one 3 Rivers Archery who is a sponsor here sells them.
|
|
From: 2 bears
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
There you go. All good ideas. I have cast led in a tuna can also but filling a bottle with shot/BB's and making a wire hook, is the safest,easiest,and quickest. Unless you also cast bullets and have the casting stuff avaialble.. Ken
|
|
From: Kodiaktd
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
Your aluminum arrow straightener would have to have 26" between the rollers to be able to use it as a spine tester. If yours is a Arizona aluminum arrow straighter like one I have it won't work. The rollers are to close together.
|
|
|
From: fdp
|
|
|
|
|
|
|
Date: 22-Jul-16 |
|
And the one that Kodiak shows works just peachy. I've used one just like that for years. It's mounted on the wall of my shop.
|
|
From: Bob Rowlands
|
|
|
|
|
|
|
Date: 23-Jul-16 |
|
Grab a few 2 lb dumbbell at Walmart. Check em on the grocery scale.
|
|
From: Don Stokes
|
|
|
|
|
|
|
Date: 24-Jul-16 |
|
Three Rivers sells a replacement for the one supplied with an Adams tester.
|
|
If you have already registered, please sign in now
For new registrations Click Here
|
|
|